Norsat ELMTBKA016-MF-IFL ELEMENT 16W Ka-Band BUC, 30.00–31.00 GHz, F-Type In, Power Over IF
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The Norsat ELMTBKA016-MF-IFL is an ELEMENT 16W Ka-Band BUC from Norsat's ELEMENT line. It upconverts an L-band IF of 950–1950 MHz to 30.00–31.00 GHz using a 29.05 GHz local oscillator, delivering 16W rated output (42 dBm minimum P1dB and 42 dBm minimum Psat).
This configuration: Input connector: F-type (75 Ω); Power input: Power Over IF. It runs on +28 to +72 VDC, drawing 140W max.
Need a different configuration? The ELEMENT 16W Ka-Band BUC Series comes in 8 part numbers. Compare them on the series page.
Other configurations
- Band: Commercial: 29.0–30.0 GHz (ELMTBKA016-CF-IFL)
- Input connector: Type-N (50 Ω) (ELMTBKA016-MN-IFL)
- Power input: External Power Supply (ELMTBKA016-MF)
Compare all 8 Norsat ELEMENT 16W Ka-Band BUC models
Specifications
| Part number | ELMTBKA016-MF-IFL |
|---|---|
| Series | Norsat ELEMENT 16W Ka-Band BUC |
| Frequency plan | IF 950–1950 MHz → LO 29.05 GHz → RF 30.00–31.00 GHz |
| Input connector | F-type (75 Ω) |
| Power input | Power Over IF |
| External reference | 10 MHz (sine-wave), - 5 to +5 dBm |
| Output power rated | 16W |
| Gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| Input VSWR | 2.0 : 1 max. |
| Linear gain (max.) | 70 dB |
| Linear gain (min.) | 60 dB |
| Linear gain (typ.) | 65 dB |
| Linear power plin | 39 dBm min. |
| Noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| Output P1dB (min.) | 42 dBm min. |
| Output power psat | 42 dBm min. |
| Output spurious in band | ≤ -55 dBc |
| Output spurious out of band | ≤ -55 dBc |
| Output VSWR | 2.0 : 1 max. |
| Phase noise 0.1kHz offset (max.) | -73 dBc/Hz |
| Phase noise @ 1 kHz (max.) | -73 dBc/Hz |
| Phase noise @ 10 kHz (max.) | -83 dBc/Hz |
| Phase noise @ 100 kHz (max.) | -93 dBc/Hz |
| Phase noise @ 1000 kHz (max.) | -103 dBc/Hz |
| Current consumption | 4.8A Max at 28 VDC |
| Power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12–4P |
| Power consumption | 140W max. |
| Power requirements | +28 to +72 VDC |
| Protection rating | IP55 |
| RF output connector | WR-28 waveguide grooved |
| Mute control | Fully configurable, (mute enable: high: 3.0–5.0 V or low: 0.0–0.8 V, mute default: enabled or disabled) |
| M and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12–10P |
| M and c interface | RS-485 & RS-232 |
| Humidity | 8–100% condensing |
| IP rating | IP 66 |
| Temperature, operational | -40 to +60 °C |
| Temperature, storage | -50 to +70 °C |
| Enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| Product weight | 1.5 kg |
| Db9 to usb adaptor | USB-RS485 |
| Optional m and c cable 10m | CABLEM+C-AT10 |
| Optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| Dimensions (L × W × H) | 168 × 108 × 78 mm |
Compliance and export
| Country of origin | Canada |
|---|---|
| ECCN | EAR99 |
| HS code | 8517690000 |
| Warranty | 3 years |
Need help sizing or integrating a transmit chain?
Digisat engineers run link budgets, select the right BUC or SSPA, and install and commission complete transmit chains for government, teleport and broadcast customers worldwide. Talk to an engineer.