Norsat ATOMSKU040E2F ATOM 40W Ku-Band SSPA, 13.75–14.50 GHz, Baseplate-Cooled, EMI/EMC Filter
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The Norsat ATOMSKU040E2F is an ATOM 40W Ku-Band SSPA from Norsat's ATOM line. It amplifies the 13.75–14.50 GHz transmit band to 40W rated output (47 dBm minimum Psat).
This configuration: Cooling: External Baseplate; Add-ons: EMI/EMC Filter. It runs on +18 to +56 VDC, drawing 305W max at saturation.
Need a different configuration? The ATOM 40W Ku-Band SSPA Series comes in 16 part numbers. Compare them on the series page.
Other configurations
- Band: Standard: 14.0–14.5 GHz (ATOMSKU040S2F)
- Cooling: Internal Fan (ATOMSKU040E1F)
- Add-ons: No Add-On (ATOMSKU040E2) · Surge Protection (ATOMSKU040E2P) · EMI/EMC Filter + Surge Protection (ATOMSKU040E2FP)
Compare all 16 Norsat ATOM 40W Ku-Band SSPA models
Specifications
| Part number | ATOMSKU040E2F |
|---|---|
| Series | Norsat ATOM 40W Ku-Band SSPA |
| Frequency range | 13.75–14.50 GHz |
| Cooling | 2: External Baseplate |
| Add-ons | EMI/EMC Filter |
| Band type | E: Extended |
| External reference | 10 MHz (sine-wave), - 5 to +5 dBm |
| Output power rated | 40W |
| Gain flatness (40MHz) | ≤ 3.0 dB p-p |
| Gain Flatness (over full band) | ≤ 8.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| Input power | via power connector |
| Input VSWR | 2.0 : 1 max. |
| Linear Gain | ≥ 60 dB |
| Noise power density | -65 dBm/Hz in Tx, -65 dBm/Hz in Rx |
| Output power psat | 47 dBm min. |
| Output spurious in band | ≤ -60 dBc |
| Output spurious out of band | ≤ -55 dBc |
| Output VSWR | 2.0 : 1 max. |
| Phase noise @ 1000 kHz (max.) | -102 dBc/Hz |
| Power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58–533723–04P |
| Power consumption psat | 305 W max. |
| Power requirements | +18 to +56 VDC |
| RF output connector | WR-75 waveguide grooved |
| Mute control | Fully configurable, (mute enable: high: 3.0–5.0 V or low: 0.0–0.8 V, mute default: enabled or disabled) |
| M and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58–533723–10P |
| M and c interface | RS-485 & RS-232 |
| Humidity | 100% condensing |
| IP rating | IP 65 |
| Temperature, operational | -40 to +60 °C |
| Temperature, storage | -50 to +80 °C |
| Enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| Product weight | 2.5 kg |
| Optional configuration add ons | F: EMI/EMC Filter |
| Optional m and c cable 10m | CABLEM+C-AT10 |
| Optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
| Dimensions (L × W × H) | 169 × 90 × 193 mm |
Compliance and export
| Country of origin | Canada |
|---|---|
| ECCN | EAR99 |
| HS code | 8517690000 |
| Warranty | 3 years |
Need help sizing or integrating a transmit chain?
Digisat engineers run link budgets, select the right BUC or SSPA, and install and commission complete transmit chains for government, teleport and broadcast customers worldwide. Talk to an engineer.