Norsat ATOMBKU040S2F ATOM 40W Ku-Band BUC, 14.00–14.50 GHz, Baseplate-Cooled, EMI/EMC Filter
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The Norsat ATOMBKU040S2F is an ATOM 40W Ku-Band BUC from Norsat's ATOM line. It upconverts an L-band IF of 950–1450 MHz to 14.00–14.50 GHz using a 13.05 GHz local oscillator, delivering 40W rated output (47 dBm minimum Psat).
This configuration: Cooling: External Baseplate; Add-ons: EMI/EMC Filter. It runs on +18 to +56 VDC, drawing 305W max at saturation.
Need a different configuration? The ATOM 40W Ku-Band BUC Series comes in 32 part numbers. Compare them on the series page.
Other configurations
- Band: Extended: 13.75–14.5 GHz (ATOMBKU040E2F)
- Cooling: Internal Fan (ATOMBKU040S1F)
- Add-ons: No Add-On (ATOMBKU040S2) · Internal Reference (ATOMBKU040S2I) · Surge Protection (ATOMBKU040S2P) · EMI/EMC Filter + Internal Reference (ATOMBKU040S2FI) · Internal Reference + Surge Protection (ATOMBKU040S2IP) · EMI/EMC Filter + Surge Protection (ATOMBKU040S2FP) · EMI/EMC Filter + Internal Reference + Surge Protection (ATOMBKU040S2FIP)
Compare all 32 Norsat ATOM 40W Ku-Band BUC models
Specifications
| Part number | ATOMBKU040S2F |
|---|---|
| Series | Norsat ATOM 40W Ku-Band BUC |
| Frequency plan | IF 950–1450 MHz → LO 13.05 GHz → RF 14.00–14.50 GHz |
| Cooling | 2: External Baseplate |
| Add-ons | EMI/EMC Filter |
| Band type | S: Standard |
| External reference | 10 MHz (sine-wave), - 5 to +5 dBm |
| Output power rated | 40W |
| Gain flatness (40MHz) | ≤ 2.0 dB p-p |
| Gain Flatness (over full band) | ≤ 6.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| Input VSWR | 2.0 : 1 max. |
| Linear Gain | ≥ 60 dB |
| Noise power density | -65 dBm/Hz in Tx, -65 dBm/Hz in Rx |
| Output power psat | 47 dBm min. |
| Output spurious in band | ≤ -55 dBc |
| Output spurious out of band P1dB | ≤ -55 dBc |
| Output VSWR | 2.0 : 1 max. |
| Phase noise @ 1 kHz (max.) | -72 dBc/Hz |
| Phase noise @ 10 kHz (max.) | -82 dBc/Hz |
| Phase noise @ 100 kHz (max.) | -92 dBc/Hz |
| Phase noise @ 1000 kHz (max.) | -102 dBc/Hz |
| Power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58–533723–04P |
| Power consumption psat | 305 W max. |
| Power requirements | +18 to +56 VDC |
| RF output connector | WR-75 waveguide grooved |
| Mute control | Fully configurable, (mute enable: high: 3.0–5.0 V or low: 0.0–0.8 V, mute default: enabled or disabled) |
| M and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58–533723–10P |
| M and c interface | RS-485 & RS-232 |
| Humidity | 100% condensing |
| IP rating | IP 65 |
| Temperature, operational | -40 to +60 °C |
| Temperature, storage | -50 to +80 °C |
| Enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| Product weight | 2.5 kg |
| Optional configuration add ons | F: EMI/EMC Filter |
| Optional m and c cable 10m | CABLEM+C-AT10 |
| Optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
| Dimensions (L × W × H) | 169 × 90 × 193 mm |
Compliance and export
| Country of origin | Canada |
|---|---|
| ECCN | EAR99 |
| HS code | 8517690000 |
| Warranty | 3 years |
Need help sizing or integrating a transmit chain?
Digisat engineers run link budgets, select the right BUC or SSPA, and install and commission complete transmit chains for government, teleport and broadcast customers worldwide. Talk to an engineer.