Norsat ATOMBKA025D2BFP ATOM 25W Ka-Band BUC, 29.00–31.00 GHz, Baseplate-Cooled + RS-485 & Ethernet, EMI/EMC Filter + Surge Protection
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The Norsat ATOMBKA025D2BFP is an ATOM 25W Ka-Band BUC from Norsat's ATOM line. It upconverts an L-band IF to 29.00–30.00 GHz (28.05 GHz LO, 950–1950 MHz IF) and 30.00–31.00 GHz (29.05 GHz LO, 950–1950 MHz IF), delivering 25W rated output (44 dBm minimum Psat and 41 dBm minimum linear power).
This configuration: Cooling + M&C: External Baseplate + RS-485 & Ethernet; Add-ons: EMI/EMC Filter + Surge Protection. It runs on +20 to +56 VDC, drawing 285W max at saturation.
Need a different configuration? The ATOM 25W Ka-Band BUC Series comes in 48 part numbers. Compare them on the series page.
Other configurations
- Band: Military: 30.0–31.0 GHz (ATOMBKA025M2BFP) · Commercial: 29.0–30.0 GHz (ATOMBKA025C2BFP)
- Cooling + M&C: Internal Fan + RS-485 & Ethernet (ATOMBKA025D1BFP) · Internal Fan + RS-485 & RS-232 (ATOMBKA025D1CFP) · External Baseplate + RS-485 & RS-232 (ATOMBKA025D2CFP)
- Add-ons: No Add-on (ATOMBKA025D2B) · EMI/EMC Filter (ATOMBKA025D2BF) · Surge Protection (ATOMBKA025D2BP)
Compare all 48 Norsat ATOM 25W Ka-Band BUC models
Specifications
| Part number | ATOMBKA025D2BFP |
|---|---|
| Series | Norsat ATOM 25W Ka-Band BUC |
| Frequency plan 1 | IF 950–1950 MHz → LO 28.05 GHz → RF 29.00–30.00 GHz |
| Frequency plan 2 | IF 950–1950 MHz → LO 29.05 GHz → RF 30.00–31.00 GHz |
| Cooling + M&C | External Baseplate + RS-485 & Ethernet |
| Add-ons | EMI/EMC Filter + Surge Protection |
| Band type | D: Dual Band |
| Output power rated | 25W |
| Gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 3.5 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| Input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| Linear power plin | 41 dBm min. |
| Noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| Output power psat | 44 dBm min. |
| Output spurious in band | ≤ -55 dBc |
| Output spurious out of band P1dB | ≤ -60 dBc |
| Output VSWR | 1.9 : 1 max. |
| Phase noise 0.1kHz offset (max.) | -62 dBc/Hz |
| Phase noise @ 1 kHz (max.) | -76 dBc/Hz |
| Phase noise @ 10 kHz (max.) | -86 dBc/Hz |
| Phase noise @ 100 kHz (max.) | -96 dBc/Hz |
| Phase noise @ 1000 kHz (max.) | -102 dBc/Hz |
| Maximum current 20 VDC | 14.8A max. |
| Power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58–533723–04P |
| Power consumption psat | 285 W max. |
| Power requirements | +20 to +56 VDC |
| RF output connector | WR-28 waveguide grooved |
| Mute control | Fully configurable, (mute enable: high: 3.0–5.0 V or low: 0.0–0.8 V, mute default: enabled or disabled) |
| M and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58–533723–10P |
| M and c interface | RS-485 & Ethernet |
| Humidity | 100% condensing |
| IP rating | IP 65 |
| Temperature, operational | -40 to +60 °C |
| Temperature, storage | -54 to +71 °C |
| Thermal shutdown temperature | 90 °C (Accuracy ± 3 °C) |
| Cooling | 2: External Baseplate |
| Enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| Product weight | 2.4 kg |
| Optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| Optional m and c cable 10m | CABLEM+C-AT10 |
| Optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
| Dimensions (L × W × H) | 140 × 80 × 170 mm |
Compliance and export
| Country of origin | Canada |
|---|---|
| ECCN | EAR99 |
| HS code | 8517690000 |
| Warranty | 3 years |
Need help sizing or integrating a transmit chain?
Digisat engineers run link budgets, select the right BUC or SSPA, and install and commission complete transmit chains for government, teleport and broadcast customers worldwide. Talk to an engineer.