{"product_id":"foxcom-ntnkit01c-ntn-optical-repeater","title":"Foxcom NTNKIT01C NTN Optical Repeater","description":"\u003cp\u003eFoxcom is offering an exclusive NTN Optical Repeater solution, which enables users to stay connected to the world at all times even if all primary communication networks are down. The NTN compatible Smartphone does not require sky view to operate, so users can remain inside in control rooms or bunkers during an emergency. Foxcom NTN (Non-Terrestrial Network) Optical Repeater is an RF over Fiber repeater solution for maintaining mobile satellite connectivity inside indoor locations, such as control rooms, operations rooms, and military bunkers. It enables NTN-compatible smartphones to operate without direct sky view, helping users stay connected during emergencies when primary communication networks are unavailable. The system uses a fiber connection between the outdoor and indoor units, making it easier to place outdoor antennas where signal reception is strongest. A standard setup includes two indoor antennas for transmit and receive, with an optional dual-zone configuration available for larger hangars or separate support areas. The NTN Optical Repeater supports N255 and N256 uplink and downlink frequency ranges, with RF input signal handling up to -20dBm on both paths and noise figure below 5dB. For optical transmission, the solution uses single-mode fibre, CWDM wavelength, FC-APC optical connectors, -3dBm \/ 0.5mW minimum optical power output, and supports fibre runs up to 3km with a 2dB optical budget. The kit includes Foxcom Sat-Light G4000 Series outdoor unit (ODU), a compact DC-powered indoor unit (IDU), dual NTN antennas and RF coax cables, with pre-connectorized fiber cables available as an option.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupports N255 and N256 NTN channels\u003c\/li\u003e\n\u003cli\u003eDownlink frequency ranges: 1525-1559 MHz and 2170–2200 MHz\u003c\/li\u003e\n\u003cli\u003eUplink frequency ranges: 1626.5–1660.5 MHz and 1980–2010 MHz\u003c\/li\u003e\n\u003cli\u003eLow noise figure of less than 5 dB on uplink and downlink paths\u003c\/li\u003e\n\u003cli\u003eRF input signal handling up to -20 dBm total power\u003c\/li\u003e\n\u003cli\u003eUses single-mode fiber, SMF-28 or equivalent\u003c\/li\u003e\n\u003cli\u003eCWDM optical wavelength with FC\/APC optical connector\u003c\/li\u003e\n\u003cli\u003eFiber length up to 3 km with 2 dB optical budget\u003c\/li\u003e\n\u003cli\u003eIncludes Sat-Light G4000 Series ODU, compact DC-powered IDU, dual NTN antennas, and RF coax cables\u003c\/li\u003e\n\u003cli\u003ePre-connectorized fiber cables available in different lengths as an option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eNTNKIT01C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFoxcom NTNKIT01C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eNTNKIT01C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSatellite Signal Repeater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency range\u003c\/th\u003e\n\u003ctd\u003e1525-1559MHz, 2170-2200MHz (N255 \u0026amp; N256)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eODU input \/ IDU output VSWR\u003c\/th\u003e\n\u003ctd\u003e1:1.6dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eODU RF input signal range [total power]\u003c\/th\u003e\n\u003ctd\u003eUp to -20dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise Figure]\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNTN Optical Repeater Frequency range\u003c\/th\u003e\n\u003ctd\u003e1626.5-1660.5MHz, 1980-2010MHz (N255 \u0026amp; N256)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIDU input \/ ODU output VSWR\u003c\/th\u003e\n\u003ctd\u003e1:1.6dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIDU RF input signal range [total power]\u003c\/th\u003e\n\u003ctd\u003eUp to -20dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise Figure\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired fiber type\u003c\/th\u003e\n\u003ctd\u003eSingle SMF -28 or equivalent [single mode]\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical wavelength\u003c\/th\u003e\n\u003ctd\u003eCWDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIDU\/ODU optical power output\u003c\/th\u003e\n\u003ctd\u003e-3dBm \/ 0.5mW (Min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical connector\u003c\/th\u003e\n\u003ctd\u003eFC-APC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiber length\u003c\/th\u003e\n\u003ctd\u003e3Km max (2dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRF Connectors\u003c\/th\u003e\n\u003ctd\u003eIndoor: Single SMA Female; Outdoor: Dual N-Type Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003eIndoor: -20 to +55 °C; Outdoor: -30 to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrder codes\u003c\/th\u003e\n\u003ctd\u003eNTNKIT01C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes an NTN-compatible smartphone need direct sky view?\u003c\/h4\u003e\u003cp\u003eNo. The repeater enables NTN-compatible smartphones to operate indoors without direct sky view.\u003c\/p\u003e\u003ch4\u003eWhich applications is this repeater suitable for?\u003c\/h4\u003e\u003cp\u003eIt is suitable for office buildings, manufacturing facilities, fleet management, maritime environments, oil rigs, control rooms, operations rooms, and military bunkers.\u003c\/p\u003e\u003ch4\u003eWhich RF connectors are used by the indoor and outdoor units?\u003c\/h4\u003e\u003cp\u003eThe indoor unit uses a single SMA female RF connector, while the outdoor unit uses dual N-Type female RF connectors.\u003c\/p\u003e\u003ch4\u003eWhich product kit is available for ordering?\u003c\/h4\u003e\u003cp\u003eThe NTNKIT01C kit supports N255 and N256 channels and includes a compact indoor unit, IP65 outdoor unit, cables, and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply and support Foxcom equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Foxcom (Global Foxcom) RF-over-fiber links, chassis, repeaters and fiber components with quote-based pricing for teleports, broadcasters, government and defense buyers, and our engineers can help design the fiber IFL, size the optical budget and integrate it with your antennas, LNBs, BUCs and modems.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Foxcom%20NTNKIT01C%20NTN%20Optical%20Repeater\u0026amp;mpn=NTNKIT01C\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Foxcom","offers":[{"title":"Default Title","offer_id":67979942461807,"sku":"FOX-NTNKIT01C","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/foxcom-ntnkit01c.jpg?v=1793910060","url":"https:\/\/digisat.org\/products\/foxcom-ntnkit01c-ntn-optical-repeater","provider":"Digisat International","version":"1.0","type":"link"}