CPI Interface Management Module (IMM) with SNMP for Legacy TWTAs
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The CPI Interface Management Module (IMM) adds Ethernet and SNMP monitoring and control to older CPI TWTAs that only have RS-232 or RS-485 serial interfaces, so they can join a modern network management system without being replaced.
It supports CPI's 400W and 750W C-, X-, Ku- and DBS-band indoor TWTAs, the T04 and T07 outdoor units and Troposat. It runs from 100–260 VAC or 9–60 VDC, mounts on the side of a rack, and ships with adapter cables.
Key features
- Adds Ethernet (RJ45) and SNMP to legacy CPI TWTAs
- Connects to the amplifier over RS-232 or RS-485
- Supports 400W and 750W C-, X-, Ku- and DBS-band IDUs, T04 and T07 outdoor units, and Troposat
- AC (100–260 VAC, 7.3 VA) or DC (9–60 VDC, 6.2W) power, including from 28 VDC CAN-bus switch systems
- 7.56 × 3.78 × 2.64 in; side-of-rack or rail mounting; adapter cables included
- -40 °C to +60 °C, 100% RH condensing; RoHS
Specifications
| Part number | Interface Management Module - SNMP |
|---|---|
| Series | CPI Interface Management Module |
| AC input | 100–260 VAC, 7.3 VA, single phase |
| DC input | 9–60 VDC, 6.2W; accepts power from 28 VDC CAN-bus switch systems |
| Amplifier interface | RS-232 / RS-485 |
| Network | RJ45 Ethernet (MS backshell supplied); SNMP |
| Supported amplifiers | VZC-6964, VZX-6984, VZU-6994 (400W IDU); VZC-6967A, VZX-6987A, VZU-6997A (750W IDU); VZU-6995AY, VZU-6997 (DBS IDU); T04*O, T07*O (ODU); VZU6996V7* (Troposat) |
| Dimensions | 7.56 W × 3.78 H × 2.64 D in (192 × 96 × 67 mm) |
| Mounting | Holes and tabs for side-of-rack or rail mounting; adapter cables included |
| Power connector | Amphenol C016-20D003-110-12 (mate supplied) |
| Temperature / humidity | -40 °C to +60 °C (derate 1.9 °C per 1000 ft); 100% RH condensing |
| Compliance | RoHS (lead-solder exemption) |
Applications
- Bringing legacy CPI TWTAs onto an SNMP network
- NMS integration without replacing amplifiers
Frequently asked questions
Which amplifiers is it for?
CPI lists the 400W C-, X- and Ku-band IDUs (VZC-6964, VZX-6984, VZU-6994), 750W C-, X- and Ku-band IDUs (VZC-6967A, VZX-6987A, VZU-6997A), 500W and 750W DBS IDUs (VZU-6995AY, VZU-6997), the T04*O and T07*O outdoor units, and Troposat (VZU6996V7*).
Can Digisat integrate this with my existing amplifiers?
Yes. Digisat engineers install and configure CPI amplifier control, redundancy and monitoring equipment, and integrate it with your M&C or NMS. Tell us which amplifiers and switches you have when you request a quote.
Need it installed, aligned or supported?
Digisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. Request installation or engineering support.