CPI DPKO14200R / DPKM14200R 200W Ku-Band SSPA, 13.75–14.50 GHz
Quote-based pricing for government, teleport and enterprise buyers.
Need it installed, integrated or supported? Ask about Digisat engineering services.
Product details
The CPI DPKO14200R / DPKM14200R is a 200W Ku-Band rack-mount SSPA from CPI's DPK14200R line. It delivers 200W saturated (+53 dBm) and 158W minimum at 1 dB compression (+52.0 dBm) across 14.00–14.50 GHz (DPKM14200R) or the extended 13.75–14.50 GHz band (DPKO14200R, 1 dB lower below 14.0 GHz).
Built with technology from CPI's ModuMAX amplifiers, it has a modular architecture with 69 dB minimum gain, forward and reflected power monitoring, SNMP and HTTP network control, and integral 1:1 redundancy control. It runs on 90–135 or 180–270 VAC (2000W typical) in a 19 in, 8.75 in high chassis.
Order it as DPKO14200R (extended band) or DPKM14200R (standard band).
Key features
- 200W saturated, 158W minimum P1dB
- 14.00–14.50 GHz (DPKM) or extended 13.75–14.50 GHz (DPKO) band
- Forward and reflected power monitoring
- Digital gain adjustment, 20 dB range in 0.1 dB steps
- Microprocessor M&C with RS-232/-422/-485 serial and a 10Base-T network interface
- Front-panel RF sample ports
- Integral 1:1 redundancy control; RCP-2001 remote control panel accessory
- Single-thread or 1:1 and 1:2 redundant systems, fixed or mobile installations
- Power-factor-corrected universal AC input; 0 °C to +50 °C operation
Specifications
| Part number | DPKO14200R / DPKM14200R |
|---|---|
| Series | CPI DPK14200R |
| Frequency range | 14.00–14.50 GHz (DPKM) or 13.75–14.50 GHz (DPKO) |
| Saturated power | 200W typ. (+53 dBm); 1 dB lower from 13.75 to 14.0 GHz on DPKO |
| Output P1dB | 158W min. (+52.0 dBm) |
| Gain at maximum setting | 69 dB min. |
| Gain flatness | ±1.0 dB full band; ±0.3 dB per 40 MHz |
| Input / output VSWR | 1.25:1 typ., 1.30:1 max. / 1.20:1 typ., 1.30:1 max. |
| Gain adjustment | 20 dB min., digital, 0.1 dB steps |
| Two-tone IMD | -25 dBc max., -30 dBc typ. at 3 dB total backoff from P1dB |
| Group delay | 0.03 ns/MHz linear, 0.003 ns/MHz² parabolic, 1.0 ns p-p ripple |
| AM/PM conversion | 2.5°/dB typ., 3.5°/dB max. at P1dB |
| RF sample ports | -10 dB input, -40 dB output, typ. |
| Connectors | Type N female RF input and sample ports; WR-75G waveguide output; 9-pos D-sub serial I/O, 25-pos D-sub parallel I/O, 15-pos D-sub system, 9-pos D-sub RCP link, RJ-45 network, 4-pos CE05 power |
| M&C | RS-232/-422/-485 serial; 10Base-T network (SNMP, HTTP); parallel I/O; RCP-2001 remote panel option |
| AC input | 90–135 VAC or 180–270 VAC, 47–63 Hz, power factor corrected |
| Cooling | Forced air |
| Operating temperature | 0 °C to +50 °C |
| Power consumption | 2000W typ., 2400W max. (cold start, saturated); PF 0.98 typ. |
| Dimensions | 8.75 H × 19 W × 27.88 D in (222 × 483 × 708 mm) |
| Weight | 93 lb (42 kg) approx. |
Applications
- Ku-band earth station and teleport uplinks
- Fixed installations and mobile terminals
- 1:1 and 1:2 redundant systems
Frequently asked questions
Can I set these up as a 1:1 or 1:2 redundant system?
Yes. Each SSPA has integral 1:1 redundancy control, and CPI builds 1:1 and 1:2 redundant systems around them. The RCP-2001 remote panel adds control from another location. Digisat can supply, install and commission the complete system.
How much rack space and power does it need?
It's a 19 in rack chassis, 8.75 in (222 mm) high and 27.88 in deep, weighing about 93 lb. It runs on 90–135 VAC or 180–270 VAC and draws about 2000W typically, up to 2400W at a cold start in saturation.
Need it installed, aligned or supported?
Digisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. Request installation or engineering support.