{"title":"Tracking Receivers","description":"\u003cp\u003eTracking receivers measure beacon or carrier level so antenna controllers can keep large antennas on the satellite.\u003c\/p\u003e\u003cp\u003eDigisat supplies tracking receivers from Avcom, C-COM, CPI, Kratos and Radeus Labs with quote-based pricing for government, teleport and enterprise buyers, accepts purchase orders and GPC, and our engineers can help size, integrate, install and support the equipment. Browse 14 part numbers below, or ask us for a configuration that is not listed.\u003c\/p\u003e","products":[{"product_id":"cpi-520a-analog-tracking-receiver","title":"CPI 520A Satellite Tracking Receiver","description":"\u003cp\u003eThe CPI Model 520A is a compact analog beacon tracking receiver with PLL detection, an 890–2450 MHz input and up to four internal block downconverters covering L through Ka-band.\u003c\/p\u003e\u003cp\u003eIt acquires at 40 dB-Hz C\/No in about a second, connects to CPI antenna controllers over Ethernet, and drives third-party controllers through its analog tracking output.\u003c\/p\u003e\u003cp\u003eOrder it as the 520A with your BDC band options. The 500 Series Tracking Receiver Series comes in 2 listed models; compare them on the series page.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/cpi-550a-digital-tracking-receiver\"\u003e550A\u003c\/a\u003e: Digital\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/cpi-500-series-tracking-receivers\"\u003eCompare all 2 CPI 500 Series Satellite Tracking Receivers models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eModel 520A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eCPI 500 Series Tracking Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e890–2450 MHz standard; BDC options L through Ka\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBDC options\u003c\/th\u003e\n\u003ctd\u003eL 0.89–2.45; S 2.0–2.8; C 3.4–4.2 \/ 3.4–4.8 \/ 4.0–4.8; X 7.25–7.75 \/ 7.6–8.5; Ku 10.7–11.9 \/ 11.8–13.0 \/ 10.7–13.0; Ka 17.0–22.3 GHz in five ranges (typically external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBeacon level\u003c\/th\u003e\n\u003ctd\u003e0 to -96 dBm; +10 dBm max. total input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning step\u003c\/th\u003e\n\u003ctd\u003e1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePredetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e280 Hz or 6 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition C\/No\u003c\/th\u003e\n\u003ctd\u003e40 dB-Hz (6 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection\u003c\/th\u003e\n\u003ctd\u003ePLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e1 s (6 kHz BW, 120 kHz sweep)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet RJ45; RS-232\/422 DB-9; USB; analog and streaming digital track outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003e2RU, 3.5 × 19 × 20 in, 23.5 lb; 4RU short-depth no-display option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100–240 VAC, 47–63 Hz, 200 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003e0 °C to +50 °C operating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=CPI%20520A%20Satellite%20Tracking%20Receiver\u0026amp;mpn=Model%20520A\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"CPI","offers":[{"title":"Default Title","offer_id":67964329165167,"sku":"CPI-520A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/cpi-520a-l-to-ka-band-tracking-receiver.jpg?v=1793924395"},{"product_id":"cpi-550a-digital-tracking-receiver","title":"CPI 550A Satellite Tracking Receiver","description":"\u003cp\u003eThe CPI Model 550A is a digital beacon tracking receiver with FFT detection and a built-in spectrum display, an 890–2450 MHz input and up to four internal block downconverters covering L through Ka-band.\u003c\/p\u003e\u003cp\u003eIt acquires at 35 dB-Hz C\/No and locks in about 300 ms, which helps on weak or scintillating beacons, and doubles as an uplink power control receiver source.\u003c\/p\u003e\u003cp\u003eOrder it as the 550A with your BDC band options. The 500 Series Tracking Receiver Series comes in 2 listed models; compare them on the series page.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/cpi-520a-analog-tracking-receiver\"\u003e520A\u003c\/a\u003e: Analog\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/cpi-500-series-tracking-receivers\"\u003eCompare all 2 CPI 500 Series Satellite Tracking Receivers models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eModel 550A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eCPI 500 Series Tracking Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e890–2450 MHz standard; BDC options L through Ka\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBDC options\u003c\/th\u003e\n\u003ctd\u003eL 0.89–2.45; S 2.0–2.8; C 3.4–4.2 \/ 3.4–4.8 \/ 4.0–4.8; X 7.25–7.75 \/ 7.6–8.5; Ku 10.7–11.9 \/ 11.8–13.0 \/ 10.7–13.0; Ka 17.0–22.3 GHz in five ranges (typically external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBeacon level\u003c\/th\u003e\n\u003ctd\u003e0 to -96 dBm; +10 dBm max. total input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning step\u003c\/th\u003e\n\u003ctd\u003e1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePredetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e250 Hz, 1 kHz or 4 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition C\/No\u003c\/th\u003e\n\u003ctd\u003e35 dB-Hz (1 kHz BW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection\u003c\/th\u003e\n\u003ctd\u003eFFT-based, no integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e300 ms (4 kHz BW, 150 kHz span)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet RJ45; RS-232\/422 DB-9; USB; analog and streaming digital track outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003e2RU, 3.5 × 19 × 20 in, 23.5 lb; 4RU short-depth no-display option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100–240 VAC, 47–63 Hz, 200 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003e0 °C to +50 °C operating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=CPI%20550A%20Satellite%20Tracking%20Receiver\u0026amp;mpn=Model%20550A\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"CPI","offers":[{"title":"Default Title","offer_id":67964329197935,"sku":"CPI-550A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/cpi-520a-l-to-ka-band-tracking-receiver.jpg?v=1793924395"},{"product_id":"kratos-ngc2-004-beacon-receiver","title":"Kratos NGC2-004 Beacon Receiver, 70–6,000 MHz","description":"\u003cp\u003eThe Kratos NGC2-004 beacon receiver measures a satellite beacon from 70 to 6,000 MHz in real time with FFT-based DSP and feeds the level straight to the NGC2 tracking controller. It is built into the NGC2-IDU or supplied as a standalone 1RU unit, in single-channel, dual-channel and monopulse versions, and it stores beacon settings per satellite so the receiver retunes itself whenever the antenna moves to a new satellite.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e70–6,000 MHz input; Ka-band beacons with an external block downconverter\u003c\/li\u003e\n\u003cli\u003eSingle, dual-channel and monopulse versions\u003c\/li\u003e\n\u003cli\u003e1 kHz tuning; 35 dB-Hz minimum C\/No; \u0026gt;100 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eBuilt into the NGC2-IDU or as a standalone 1RU unit\u003c\/li\u003e\n\u003cli\u003eDC output for uplink power control\u003c\/li\u003e\n\u003cli\u003eWorks with commercial and military beacons (NATO, Skynet, DSCS, WGS)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart numbers\u003c\/th\u003e\n\u003ctd\u003eNGC2-004-03, NGC2-004-03-2, NGC2-004-MP, NGC2-004-MP-X, NGC2-004-I03-02-IDU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eKratos NGC2-004 Beacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e70–6,000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuner resolution\u003c\/th\u003e\n\u003ctd\u003e1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput beacon level\u003c\/th\u003e\n\u003ctd\u003e-105 to 0 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum C\/No\u003c\/th\u003e\n\u003ctd\u003e35 dB-Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF bandwidth\u003c\/th\u003e\n\u003ctd\u003e1–250 kHz, programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.5 s at 1 MHz BW; \u0026lt; 0.1 s at 250 kHz BW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput connector\u003c\/th\u003e\n\u003ctd\u003eSMA, 50 Ω; VSWR \u0026lt; 1.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eInternal or external 10 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e-40 to +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e+24 VDC from the NGC2-IDU; 7 W (single) \/ 11 W (dual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKratos bulletin\u003c\/th\u003e\n\u003ctd\u003eKPBESANGC2-004-xx.A2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStep-track and SmarTrack antenna tracking\u003c\/li\u003e\n\u003cli\u003eMonopulse Ka-band tracking\u003c\/li\u003e\n\u003cli\u003eUplink power control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes Digisat supply and support the Kratos NGC2-004 Beacon Receiver?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Kratos satcom equipment with quote-based pricing for government, teleport and enterprise buyers, and our engineers can help configure it, integrate it and support it after installation.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Kratos%20NGC2-004%20Beacon%20Receiver\u0026amp;mpn=NGC2-004\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Kratos","offers":[{"title":"Default Title","offer_id":67977298870639,"sku":"KRT-NGC2-004","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/kratos-ngc2-004-tracking-receiver.jpg?v=1793924912"},{"product_id":"c-com-inetvu-br-400l-beacon-receiver","title":"C-COM iNetVu BR-400L Beacon Receiver","description":"\u003cp\u003eThe C-COM iNetVu BR-400L is a 19 in rack-mount L-band beacon receiver that tracks the power of a satellite beacon in real time and outputs a DC voltage proportional to it. It works with all iNetVu controllers for beacon-based acquisition and peaking, and replaces the earlier BR300L.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput frequency: 950–2200 MHz, 10 kHz steps\u003c\/li\u003e\n\u003cli\u003eInput level: -105 to -20 dBm\u003c\/li\u003e\n\u003cli\u003ePre-detection bandwidth: ±100 kHz\u003c\/li\u003e\n\u003cli\u003eOutput: 0 to +10 VDC AGC voltage, linear with beacon level\u003c\/li\u003e\n\u003cli\u003eInput: 75 Ω F-type (50 Ω N-type: BR-400L-50)\u003c\/li\u003e\n\u003cli\u003eStability: ±1.0 ppm frequency; ≤ 0.2 dB signal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eiNetVu BR-400L Beacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eC-COM iNetVu BR-400L Beacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e950–2200 MHz, 10 kHz steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput level\u003c\/th\u003e\n\u003ctd\u003e-105 to -20 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePre-detection bandwidth\u003c\/th\u003e\n\u003ctd\u003e±100 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e0 to +10 VDC AGC voltage, linear with beacon level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e75 Ω F-type (50 Ω N-type: BR-400L-50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStability\u003c\/th\u003e\n\u003ctd\u003e±1.0 ppm frequency; ≤ 0.2 dB signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM\u0026amp;C\u003c\/th\u003e\n\u003ctd\u003eRS-232 @ 19,200 bps (DB-9)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003e19 in rack, 1.75 in high; 5 kg (11 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100–240 VAC; ≤ 2.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnvironment\u003c\/th\u003e\n\u003ctd\u003eOperating -20 to +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eiNetVu antenna systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes Digisat supply and support C-COM iNetVu systems?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies C-COM iNetVu driveaway, flyaway, manpack and fixed motorized antennas, controllers and accessories with quote-based pricing for government, defense, broadcast and enterprise buyers, and our engineers can help choose the antenna and band, integrate the modem and RF package, and support the system in the field.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=C-COM%20iNetVu%20BR-400L%20Beacon%20Receiver\u0026amp;mpn=iNetVu%20BR-400L%20Beacon%20Receiver\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"C-COM","offers":[{"title":"Default Title","offer_id":67979215143279,"sku":"CCM-BR400L","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/c-com-inetvu-br-400l-beacon-receiver.jpg?v=1793925247"},{"product_id":"radeus-labs-3400-l-band-beacon-tracking-receiver","title":"Radeus Labs 3400-L L-Band Beacon Tracking Receiver","description":"\u003cp\u003eThe Radeus Labs Model 3400-L is a 1RU L-band beacon receiver for step-track antennas and uplink power control. It tunes 930 to 2300 MHz in 1 kHz steps, locks at -110 dBm with a 50 kHz (or 25 kHz) pre-detection bandwidth for accurate tracking at very low C\/N, and outputs a DC voltage proportional to signal level for the antenna controller and UPC. Digital level reference, temperature compensation for fast acquisition, Form-C loss-of-carrier alarm, front-panel display and Ethernet plus RS-232\/422\/485 control are standard, with 24 V LNB power available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e930-2300 MHz L-band input, 1 kHz steps\u003c\/li\u003e\n\u003cli\u003eLocks at -110 dBm; acquisition at 4 dB C\/N\u003c\/li\u003e\n\u003cli\u003eDC tracking output (0.5 V\/dB) for ACU and uplink power control\u003c\/li\u003e\n\u003cli\u003eDigital level reference, 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003eEthernet plus RS-232\/422\/485 M\u0026amp;C\u003c\/li\u003e\n\u003cli\u003eForm-C loss-of-carrier alarm\u003c\/li\u003e\n\u003cli\u003e+24 V LNB power\u003c\/li\u003e\n\u003cli\u003eTemperature compensation for rapid acquisition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e3400-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRadeus Labs 3400-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e3400-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e930-2300 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput level\u003c\/th\u003e\n\u003ctd\u003e-40 to -100 dBm typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. level for lock\u003c\/th\u003e\n\u003ctd\u003e-110 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThreshold\u003c\/th\u003e\n\u003ctd\u003e4 dB C\/N acquisition; \u0026lt; 1 dB C\/N carrier lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking output\u003c\/th\u003e\n\u003ctd\u003e0 to +10 VDC over 20 dB; 0.5 V\/dB; ±0.25 dB linearity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePre-detection bandwidth\u003c\/th\u003e\n\u003ctd\u003e50 kHz (25 kHz option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAFC\u003c\/th\u003e\n\u003ctd\u003e±25 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput connector\u003c\/th\u003e\n\u003ctd\u003eType N female, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM\u0026amp;C\u003c\/th\u003e\n\u003ctd\u003eEthernet 10\/100, RS-232\/422\/485 (DB-9)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLNB power\u003c\/th\u003e\n\u003ctd\u003e+24 V, 0.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e90-260 VAC, 45 W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1RU, 19 x 16 x 1.75 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Radeus Labs controllers replace an older antenna control system?\u003c\/h4\u003e\u003cp\u003eYes. The Series 8000 has a retrofit option that works with legacy drive-cabinet interfaces and existing encoders or resolvers, and Radeus Labs designs control systems for both new builds and upgrades. Digisat can help survey your antenna, drives and tracking receiver and quote the right Radeus configuration.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Radeus Labs antenna control systems?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Radeus Labs antenna control systems, beacon receivers and accessories with quote-based pricing for teleports, government, military and research sites, and our engineers can help integrate them with your antenna, drives and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Radeus%20Labs%203400-L%20L-Band%20Beacon%20Tracking%20Receiver\u0026amp;mpn=3400-L\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radeus Labs","offers":[{"title":"Default Title","offer_id":67982486503791,"sku":"RDL-3400-L","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/radeus-labs-3400-l.jpg?v=1793925585"},{"product_id":"radeus-labs-3500-l-band-digital-beacon-receiver","title":"Radeus Labs 3500 L-Band Digital Beacon Receiver","description":"\u003cp\u003eThe Radeus Labs Model 3500 is a fully synthesized, hybrid analog\/digital beacon receiver for step-track and uplink power control. It covers 930 to 2300 MHz in 1 kHz steps, locks at -115 dBm (40 dB-Hz sensitivity) using non-coherent FFT detection, and offers software-selectable detection bandwidths from 2.5 to 280 kHz plus AccuTrack search windows up to ±800 kHz to follow drifting beacons, with output smoothing and multiple acquisition bandwidths that make it 5G-ready. Up to four RF inputs, selectable LO offsets for an external LNB or BDC, 24 V \/ 1 A LNB power, an Ethernet GUI and serial M\u0026amp;C come in a single 1RU unit.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully synthesized hybrid analog\/digital receiver\u003c\/li\u003e\n\u003cli\u003eNon-coherent FFT detection; -115 dBm lock\u003c\/li\u003e\n\u003cli\u003eDetection bandwidths 2.5-280 kHz, software selectable\u003c\/li\u003e\n\u003cli\u003eAccuTrack search up to ±800 kHz for drifting beacons\u003c\/li\u003e\n\u003cli\u003eUp to 4 type-N RF inputs\u003c\/li\u003e\n\u003cli\u003eSelectable tracking slope 0.25 \/ 0.5 \/ 1.0 V\/dB\u003c\/li\u003e\n\u003cli\u003eFront-panel LO settings for external LNB\/BDC\u003c\/li\u003e\n\u003cli\u003eEthernet GUI and serial M\u0026amp;C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRadeus Labs 3500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e930-2300 MHz (C and Ku via external LNB\/BDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput level\u003c\/th\u003e\n\u003ctd\u003e-40 to -100 dBm typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. level for lock\u003c\/th\u003e\n\u003ctd\u003e-115 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003e40 dB-Hz C\/N0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection\u003c\/th\u003e\n\u003ctd\u003eNon-coherent FFT; 2.5, 4, 15, 25, 50, 280 kHz bandwidths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuTrack search\u003c\/th\u003e\n\u003ctd\u003e±50 to ±800 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking output\u003c\/th\u003e\n\u003ctd\u003e0 to +10 VDC over 20 dB; 0.25 \/ 0.5 \/ 1.0 V\/dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRF inputs\u003c\/th\u003e\n\u003ctd\u003eUp to 4x type N female, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM\u0026amp;C\u003c\/th\u003e\n\u003ctd\u003eEthernet 10\/100 GUI; RS-232 or RS-422\/485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLNB power\u003c\/th\u003e\n\u003ctd\u003e+24 V, 1 A with current monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e90-260 VAC, 45 W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1RU, 19 x 16 x 1.75 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Radeus Labs controllers replace an older antenna control system?\u003c\/h4\u003e\u003cp\u003eYes. The Series 8000 has a retrofit option that works with legacy drive-cabinet interfaces and existing encoders or resolvers, and Radeus Labs designs control systems for both new builds and upgrades. Digisat can help survey your antenna, drives and tracking receiver and quote the right Radeus configuration.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Radeus Labs antenna control systems?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Radeus Labs antenna control systems, beacon receivers and accessories with quote-based pricing for teleports, government, military and research sites, and our engineers can help integrate them with your antenna, drives and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Radeus%20Labs%203500%20L-Band%20Digital%20Beacon%20Receiver\u0026amp;mpn=3500\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radeus Labs","offers":[{"title":"Default Title","offer_id":67982486667631,"sku":"RDL-3500","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/radeus-labs-3500.jpg?v=1793925586"},{"product_id":"avcom-lbr-2195a-embedded-l-band-beacon-receiver","title":"Avcom LBR-2195A Embedded L-Band Beacon Receiver","description":"\u003cp\u003eThe Avcom LBR-2195A is a compact, single-input L-band beacon receiver module for antenna tracking and uplink power control systems, made for low-profile and restricted spaces. A synthesized direct-conversion tuner covers 950 to 2150 MHz, locks on CW beacons and BPSK carriers (and DVB carriers with Carrier-Edge-Power-Track) down to 39 dB-Hz C\/N0, typically in under a second, and delivers a 0 to 10 VDC level output with adjustable slope, a digital lock output and a Form-C alarm relay. A serial text-based API suits simple embedded processors, with a full API over USB, and it comes in a nickel-plated block (BLK) or painted enclosure (CLM).\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e950-2150 MHz L-band, 1 kHz steps\u003c\/li\u003e\n\u003cli\u003eTracks CW, BPSK and DVB (CEPT) carriers\u003c\/li\u003e\n\u003cli\u003eLock in under 1 s typical; 39 dB-Hz min. C\/N0\u003c\/li\u003e\n\u003cli\u003e0-10 VDC output, 0.1-3.0 V\/dB slope\u003c\/li\u003e\n\u003cli\u003eDigital lock output and Form-C alarm relay\u003c\/li\u003e\n\u003cli\u003eRS-422\/RS-232 text API and USB API\u003c\/li\u003e\n\u003cli\u003e8-33 VDC, under 3 W\u003c\/li\u003e\n\u003cli\u003eBLK or CLM enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart numbers\u003c\/th\u003e\n\u003ctd\u003eLBR-2195A-BLK LBR-2195A-CLM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAvcom LBR-2195A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eLBR-2195A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e950-2150 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput level\u003c\/th\u003e\n\u003ctd\u003e-30 to -90 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. input\u003c\/th\u003e\n\u003ctd\u003e-20 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-750 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-150 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCarrier types\u003c\/th\u003e\n\u003ctd\u003eCW, BPSK, CEPT on DVB (no demod)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. C\/N0\u003c\/th\u003e\n\u003ctd\u003e39 dB-Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;1 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel output\u003c\/th\u003e\n\u003ctd\u003e0-10 VDC, 10 mA; slope 0.1-3.0 V\/dB, +\/- polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock output\u003c\/th\u003e\n\u003ctd\u003e0-3.3 VDC, selectable polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarm\u003c\/th\u003e\n\u003ctd\u003eForm C relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eRS-422, RS-232, RS-232 data stream, USB (DB-25)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput connector\u003c\/th\u003e\n\u003ctd\u003eSMA, 50 Ω, DC blocked to 25 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e8-33 VDC, \u0026lt;3 W; reverse-polarity and surge protected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosures\u003c\/th\u003e\n\u003ctd\u003eBLK nickel-plated block 4.75 x 4 x 1.07 in; CLM painted 5.5 x 4.5 x 0.94 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e-30 to 60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Avcom beacon receivers drive my antenna controller?\u003c\/h4\u003e\u003cp\u003eYes. Avcom beacon receivers output a 0 to 10 VDC level with adjustable slope plus a digital lock signal, the inputs most antenna controllers and uplink power controllers expect, and their serial, USB and Ethernet APIs suit integration. Digisat can confirm compatibility with your ACU and supply the receiver.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Avcom spectrum analyzers and beacon receivers?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies the current Avcom line with quote-based pricing, and our engineers can configure inputs, frequency range and interfaces and integrate the analyzer or beacon receiver with your antenna controller and M\u0026amp;C system.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Avcom%20LBR-2195A%20Embedded%20L-Band%20Beacon%20Receiver\u0026amp;mpn=LBR-2195A\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Avcom","offers":[{"title":"Default Title","offer_id":67983109226863,"sku":"AVC-LBR-2195A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/avcom-lbr-2195a.png?v=1793923897"},{"product_id":"avcom-br-mod-1-9-b-embedded-beacon-receiver-module","title":"Avcom BR-MOD-1-9-B Embedded Beacon Receiver Module","description":"\u003cp\u003eThe Avcom BR-MOD-1-9-B is a rugged embedded beacon receiver module, 3 x 3.5 inches and 200 g, built for on-the-move terminals as well as fixed sites. It acquires CW beacons quickly, tracks BPSK carriers, and uses Avcom's exclusive Carrier-Edge-Power-Tracking (CEPT) to lock on wideband DVB-like carriers, with a 0 to 10 VDC level output and digital lock and run outputs. When it is not tracking it works as a full spectrum analyzer, so one device can track a beacon and monitor a carrier. Versions cover 900-2200 MHz (standard), 400-3000 MHz or 70-6000 MHz, and it connects over Ethernet, USB or RS-422\/232 to the web GUI, POSIX-C API, text-based API or EVO GUI.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTracks CW and BPSK beacons; CEPT for DVB-like carriers\u003c\/li\u003e\n\u003cli\u003eDoubles as a full spectrum analyzer\u003c\/li\u003e\n\u003cli\u003eFor on-the-move and fixed-site antennas\u003c\/li\u003e\n\u003cli\u003e900-2200, 400-3000 or 70-6000 MHz versions\u003c\/li\u003e\n\u003cli\u003eLow SWaP: 200 g, under 3 W\u003c\/li\u003e\n\u003cli\u003eOperates -40 to 70 °C, to 40,000 ft\u003c\/li\u003e\n\u003cli\u003eEthernet, USB and RS-422\/232 M\u0026amp;C\u003c\/li\u003e\n\u003cli\u003e0-10 VDC level output, 0.1-3.0 V\/dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart numbers\u003c\/th\u003e\n\u003ctd\u003eBR-MOD-1-9-B-1S BR-MOD-1-9-B-1S-3040 BR-MOD-1-9-B-1S-6070 BR-MOD-1-9-B-2S BR-MOD-1-9-B-2S-3040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAvcom BR-MOD-1-9-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBR-MOD-1-9-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency range\u003c\/th\u003e\n\u003ctd\u003e900-2200 MHz (std), 400-3000 MHz (-3040), 70-6000 MHz (-6070)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1 or 2, SMA 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking\u003c\/th\u003e\n\u003ctd\u003ePeak following (CW, BPSK); CEPT (DVB-like carriers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-750 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-150 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCEPT bandwidth\u003c\/th\u003e\n\u003ctd\u003e1-30 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack rate\u003c\/th\u003e\n\u003ctd\u003e10, 25 or 100 Hz (CEPT 10 or 25 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. C\/N0\u003c\/th\u003e\n\u003ctd\u003e39 dB-Hz (CW\/BPSK); 54 dB-Hz (CEPT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;1 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel output\u003c\/th\u003e\n\u003ctd\u003e0-10 VDC, 10 mA; slope 0.1-3.0 V\/dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock output\u003c\/th\u003e\n\u003ctd\u003e0-3.3 VDC, selectable polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet 10\/100, RS-422\/RS-232, USB (Molex headers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e8-33 VDC, \u0026lt; 3 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3 x 3.5 x 1.062 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.1 oz (200 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e-40 to 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Avcom beacon receivers drive my antenna controller?\u003c\/h4\u003e\u003cp\u003eYes. Avcom beacon receivers output a 0 to 10 VDC level with adjustable slope plus a digital lock signal, the inputs most antenna controllers and uplink power controllers expect, and their serial, USB and Ethernet APIs suit integration. Digisat can confirm compatibility with your ACU and supply the receiver.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Avcom spectrum analyzers and beacon receivers?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies the current Avcom line with quote-based pricing, and our engineers can configure inputs, frequency range and interfaces and integrate the analyzer or beacon receiver with your antenna controller and M\u0026amp;C system.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Avcom%20BR-MOD-1-9-B%20Embedded%20Beacon%20Receiver%20Module\u0026amp;mpn=BR-MOD-1-9-B\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Avcom","offers":[{"title":"Default Title","offer_id":67983109259631,"sku":"AVC-BR-MOD-1-9-B","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/avcom-br-mod-1-9-b.png?v=1793923896"},{"product_id":"avcom-evo-rbr-rev-b-rack-mount-beacon-receiver","title":"Avcom EVO-RBR Rev B Rack Mount Beacon Receiver","description":"\u003cp\u003eThe Avcom EVO-RBR (Rev B) is a 1RU rack-mount satellite beacon receiver on Avcom's newest platform. It acquires CW beacons in under a second, tracks BPSK carriers and uses Avcom's exclusive Carrier-Edge-Power-Tracking (CEPT) to follow DVB-like carriers, with a 0 to 10 VDC level output and digital lock outputs on a terminal block for the antenna controller. When not tracking it works as a full spectrum analyzer. Versions cover 900-2200 MHz, 400-3000 MHz or 70-6000 MHz with SMA, BNC, F or N inputs, and M\u0026amp;C runs over Ethernet, USB or RS-232 with the web GUI, POSIX-C API, text-based API or EVO GUI.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTracks CW and BPSK beacons; CEPT for DVB-like carriers\u003c\/li\u003e\n\u003cli\u003eDoubles as a full spectrum analyzer\u003c\/li\u003e\n\u003cli\u003e900-2200, 400-3000 or 70-6000 MHz versions\u003c\/li\u003e\n\u003cli\u003eSMA, BNC, F or N inputs\u003c\/li\u003e\n\u003cli\u003e0-10 VDC level output, 0.1-3.0 V\/dB\u003c\/li\u003e\n\u003cli\u003eTrack rate 10, 25 or 100 Hz\u003c\/li\u003e\n\u003cli\u003eEthernet, USB and RS-232 M\u0026amp;C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart numbers\u003c\/th\u003e\n\u003ctd\u003eEVO-RBR-2290B-1S EVO-RBR-3040B-1S EVO-RBR-2290B-1B EVO-RBR-3040B-1B EVO-RBR-2290B-1F EVO-RBR-3040B-1F EVO-RBR-2290B-1N EVO-RBR-3040B-1N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAvcom EVO-RBR Rev B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEVO-RBR Rev B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency range\u003c\/th\u003e\n\u003ctd\u003e900-2200 MHz (2290), 400-3000 MHz (3040), 70-6000 MHz (6070)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eSMA, BNC, N (50 Ω) or F (75 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-750 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-150 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack rate\u003c\/th\u003e\n\u003ctd\u003e10, 25 or 100 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCarrier types\u003c\/th\u003e\n\u003ctd\u003eCW, BPSK, CEPT on DVB (no demod)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. C\/N0\u003c\/th\u003e\n\u003ctd\u003e39 dB-Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;1 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel output\u003c\/th\u003e\n\u003ctd\u003e0-10 VDC, 10 mA; slope 0.1-3.0 V\/dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock output\u003c\/th\u003e\n\u003ctd\u003e0-3.3 VDC, selectable polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet 10\/100 (RJ-45), RS-232 (DB-9), USB-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e15 VDC, 0.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1RU, 19 x 18.13 x 1.72 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.2 lb (3.27 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e0 to 50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Avcom beacon receivers drive my antenna controller?\u003c\/h4\u003e\u003cp\u003eYes. Avcom beacon receivers output a 0 to 10 VDC level with adjustable slope plus a digital lock signal, the inputs most antenna controllers and uplink power controllers expect, and their serial, USB and Ethernet APIs suit integration. Digisat can confirm compatibility with your ACU and supply the receiver.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Avcom spectrum analyzers and beacon receivers?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies the current Avcom line with quote-based pricing, and our engineers can configure inputs, frequency range and interfaces and integrate the analyzer or beacon receiver with your antenna controller and M\u0026amp;C system.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Avcom%20EVO-RBR%20Rev%20B%20Rack%20Mount%20Beacon%20Receiver\u0026amp;mpn=EVO-RBR%20Rev%20B\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Avcom","offers":[{"title":"Default Title","offer_id":67983109292399,"sku":"AVC-EVO-RBR-REV-B","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/avcom-evo-rbr-rev-b.png?v=1793923896"},{"product_id":"avcom-sbs2-2150e-s3c0-b-embedded-l-band-beacon-receiver","title":"Avcom SBS2-2150E-S3C0-B Embedded L-Band Beacon Receiver","description":"\u003cp\u003eThe Avcom SBS2-2150E-S3C0-B combines an L-band beacon receiver and spectrum analyzer on one low-SWaP board for satcom-on-the-move and other integrated terminals. It covers 950 to 2150 MHz and tracks CW or BPSK beacons, carrier power at a set frequency and bandwidth (Tuned-Power-Tracking) or wide carriers such as DVB (Carrier-Edge-Power-Tracking), with 0 to 10 VDC level and digital lock outputs. It runs from 15 to 24 VDC at 7 W and is controlled over Ethernet or USB with the included EVO GUI or POSIX-compliant C libraries for Windows and Linux.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeacon receiver and spectrum analyzer on one board\u003c\/li\u003e\n\u003cli\u003eTracks CW\/BPSK beacons, TPT and CEPT carrier power\u003c\/li\u003e\n\u003cli\u003e950-2150 MHz, 1 kHz steps\u003c\/li\u003e\n\u003cli\u003eLock in under 1 s typical\u003c\/li\u003e\n\u003cli\u003e0-10 VDC level output, 0.1-3.0 V\/dB\u003c\/li\u003e\n\u003cli\u003eEthernet and USB with EVO GUI or C API\u003c\/li\u003e\n\u003cli\u003eLow SWaP-C for SOTM terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSBS2-2150E-S3C0-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAvcom SBS2-2150E-S3C0-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSBS2-2150E-S3C0-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBeacon Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput frequency\u003c\/th\u003e\n\u003ctd\u003e950-2150 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput level\u003c\/th\u003e\n\u003ctd\u003e0 to -115 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. input\u003c\/th\u003e\n\u003ctd\u003e+10 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDetection bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-750 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking bandwidth\u003c\/th\u003e\n\u003ctd\u003e10-150 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking modes\u003c\/th\u003e\n\u003ctd\u003eBeacon (CW, BPSK); TPT tuned power; CEPT wide carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. C\/N0\u003c\/th\u003e\n\u003ctd\u003e40 dB-Hz (3 kHz RBW) to 48 dB-Hz (30 kHz RBW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack rate\u003c\/th\u003e\n\u003ctd\u003e10 or 25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition time\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;1 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel output\u003c\/th\u003e\n\u003ctd\u003e0-10 VDC, 50 mA max.; slope 0.1-3.0 V\/dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock output\u003c\/th\u003e\n\u003ctd\u003e0-3.3 VDC, selectable polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet 10\/100, USB (connectors or headers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput connector\u003c\/th\u003e\n\u003ctd\u003eSMA, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e15-24 VDC, 7 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3.75 x 5.75 x 1.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.8 lb (360 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAltitude\u003c\/th\u003e\n\u003ctd\u003eUp to 26,000 ft (8,000 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan Avcom beacon receivers drive my antenna controller?\u003c\/h4\u003e\u003cp\u003eYes. Avcom beacon receivers output a 0 to 10 VDC level with adjustable slope plus a digital lock signal, the inputs most antenna controllers and uplink power controllers expect, and their serial, USB and Ethernet APIs suit integration. Digisat can confirm compatibility with your ACU and supply the receiver.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply Avcom spectrum analyzers and beacon receivers?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies the current Avcom line with quote-based pricing, and our engineers can configure inputs, frequency range and interfaces and integrate the analyzer or beacon receiver with your antenna controller and M\u0026amp;C system.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Avcom%20SBS2-2150E-S3C0-B%20Embedded%20L-Band%20Beacon%20Receiver\u0026amp;mpn=SBS2-2150E-S3C0-B\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Avcom","offers":[{"title":"Default Title","offer_id":67983109390703,"sku":"AVC-SBS2-2150E-S3C0-B","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/avcom-sbs2-2150e-s3c0-b.png?v=1793923896"}],"url":"https:\/\/digisat.org\/collections\/tracking-receivers.oembed","provider":"Digisat International","version":"1.0","type":"link"}