{"title":"Modem Redundancy Switches","description":"\u003cp\u003eModem redundancy switches back up one or more satellite modems automatically, switching IF and data interfaces when a fault is detected.\u003c\/p\u003e\u003cp\u003eDigisat supplies modem redundancy switches from Calian, Comtech, International Datacasting, Novelsat, ST Engineering iDirect, Sencore and Teledyne Paradise Datacom with quote-based pricing for government, teleport and enterprise buyers, accepts purchase orders and GPC, and our engineers can help size, integrate, install and support the equipment. Browse 13 part numbers below, or ask us for a configuration that is not listed.\u003c\/p\u003e","products":[{"product_id":"comtech-crs-150","title":"Comtech CRS-150 Modem Redundancy Switch","description":"\u003cp\u003eThe Comtech CRS-150 is an active 1:1 modem redundancy switch for 70\/140 MHz modems. It sends a copy of the transmit traffic to the offline modem so both units see identical data, and switches automatically if the online modem fails.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-170a\"\u003eCRS-170A\u003c\/a\u003e: a passive 1:1 L-band modem redundancy switch\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-180\"\u003eCRS-180\u003c\/a\u003e: a passive 1:1 70\/140 MHz modem redundancy switch\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-500\"\u003eCRS-500\u003c\/a\u003e: a 1:N modem redundancy switching system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/comtech-crs-series-modem-redundancy-switches\"\u003eCompare all 4 Comtech CRS Series Modem Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCRS-150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eComtech CRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e1:1, active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\u003c\/th\u003e\n\u003ctd\u003e70\/140 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompanion modems\u003c\/th\u003e\n\u003ctd\u003eCDM-600; CDM-600L (with CRS-170A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Comtech%20CRS-150%20Modem%20Redundancy%20Switch\u0026amp;mpn=CRS-150\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Comtech","offers":[{"title":"Default Title","offer_id":67966337155439,"sku":"CMT-CRS-150","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/comtech-crs-series-modem-redundancy-switch.jpg?v=1793924567"},{"product_id":"comtech-crs-170a","title":"Comtech CRS-170A Modem Redundancy Switch","description":"\u003cp\u003eThe Comtech CRS-170A is a passive 1:1 L-band modem redundancy switch. It switches the L-band IF between a pair of modems linked by a Y-cable for data, for CDM-625\/625A, CDM-570L\/570AL, CDM-700, CDM-710, CDM-710G, CDM-750 and CDM-760 pairs.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-150\"\u003eCRS-150\u003c\/a\u003e: an active 1:1 modem redundancy switch for 70\/140 MHz modems\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-180\"\u003eCRS-180\u003c\/a\u003e: a passive 1:1 70\/140 MHz modem redundancy switch\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-500\"\u003eCRS-500\u003c\/a\u003e: a 1:N modem redundancy switching system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/comtech-crs-series-modem-redundancy-switches\"\u003eCompare all 4 Comtech CRS Series Modem Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCRS-170A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eComtech CRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e1:1, passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\u003c\/th\u003e\n\u003ctd\u003eL-band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompanion modems\u003c\/th\u003e\n\u003ctd\u003eCDM-625\/625A, CDM-570L\/570AL, CDM-600L, CDM-700, CDM-710, CDM-710G, CDM-750, CDM-760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Comtech%20CRS-170A%20Modem%20Redundancy%20Switch\u0026amp;mpn=CRS-170A\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Comtech","offers":[{"title":"Default Title","offer_id":67966337188207,"sku":"CMT-CRS-170A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/comtech-crs-series-modem-redundancy-switch.jpg?v=1793924567"},{"product_id":"comtech-crs-180","title":"Comtech CRS-180 Modem Redundancy Switch","description":"\u003cp\u003eThe Comtech CRS-180 is a passive 1:1 70\/140 MHz modem redundancy switch. It switches the 70\/140 MHz IF between a pair of modems linked by a Y-cable for data.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-150\"\u003eCRS-150\u003c\/a\u003e: an active 1:1 modem redundancy switch for 70\/140 MHz modems\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-170a\"\u003eCRS-170A\u003c\/a\u003e: a passive 1:1 L-band modem redundancy switch\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-500\"\u003eCRS-500\u003c\/a\u003e: a 1:N modem redundancy switching system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/comtech-crs-series-modem-redundancy-switches\"\u003eCompare all 4 Comtech CRS Series Modem Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCRS-180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eComtech CRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e1:1, passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\u003c\/th\u003e\n\u003ctd\u003e70\/140 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompanion modems\u003c\/th\u003e\n\u003ctd\u003eCDM-625\/625A, CDM-570\/570A, CDM-700, CDM-710, CDM-710G, CDM-750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Comtech%20CRS-180%20Modem%20Redundancy%20Switch\u0026amp;mpn=CRS-180\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Comtech","offers":[{"title":"Default Title","offer_id":67966337220975,"sku":"CMT-CRS-180","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/comtech-crs-series-modem-redundancy-switch.jpg?v=1793924567"},{"product_id":"comtech-crs-500","title":"Comtech CRS-500 Modem Redundancy Switch","description":"\u003cp\u003eThe Comtech CRS-500 is a 1:N modem redundancy switching system. One standby modem protects several primaries, with the CRS-280L switch unit handling L-band IF from 950 to 1950 MHz.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-150\"\u003eCRS-150\u003c\/a\u003e: an active 1:1 modem redundancy switch for 70\/140 MHz modems\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-170a\"\u003eCRS-170A\u003c\/a\u003e: a passive 1:1 L-band modem redundancy switch\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/comtech-crs-180\"\u003eCRS-180\u003c\/a\u003e: a passive 1:1 70\/140 MHz modem redundancy switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/comtech-crs-series-modem-redundancy-switches\"\u003eCompare all 4 Comtech CRS Series Modem Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eCRS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eComtech CRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e1:N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\u003c\/th\u003e\n\u003ctd\u003eL-band (CRS-280L, 950–1950 MHz) or 70\/140 MHz (CRS-280)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF switch connectors\u003c\/th\u003e\n\u003ctd\u003eTX\/RX Type N, 15 dB return loss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100–240 VAC 50\/60 Hz or 36–60 VDC, 25W; redundant inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4RU: 7\" H x 19\" W x 14\" D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Comtech%20CRS-500%20Modem%20Redundancy%20Switch\u0026amp;mpn=CRS-500\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Comtech","offers":[{"title":"Default Title","offer_id":67966337253743,"sku":"CMT-CRS-500","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/comtech-crs-500-modem-redundancy-switch.jpg?v=1793924566"},{"product_id":"teledyne-paradise-datacom-pdqs","title":"Teledyne Paradise Datacom PDQS 1:N Modem Redundancy Switch","description":"\u003cp\u003eThe Teledyne Paradise Datacom Q-NET PDQS 1:N Redundancy Switch protects up to 16 traffic modems, which can all run different services (IF or L-band, different interfaces and waveforms). The backup modem is kept separate from the switch, so either can be hot-swapped, and it can be any QFlex-400, QMultiFlex-400 or Q-Lite. With QMultiFlex-400 hubs it protects up to 16 shared outbounds and 128 inbound services at once.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProtects up to 16 traffic modems (1:N)\u003c\/li\u003e\n\u003cli\u003eBackup modem and switch each replaceable without affecting traffic\u003c\/li\u003e\n\u003cli\u003eIP, G.703 E1\/T1 and E2\/T2 and EIA-530 traffic\u003c\/li\u003e\n\u003cli\u003eTraffic modem prioritization\u003c\/li\u003e\n\u003cli\u003eModular 3U chassis; redundant power supplies\u003c\/li\u003e\n\u003cli\u003eTurnkey wired modem rack systems available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003ePDQS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eTeledyne Paradise Datacom PDQS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e1:N, up to 16 modems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic interfaces\u003c\/th\u003e\n\u003ctd\u003e10\/100Base-T IP, G.703 E1\/T1 and E2\/T2, EIA-530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003e3U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTeleport and hub modem racks\u003c\/li\u003e\n\u003cli\u003ePoint-to-point and point-to-multipoint protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhat is needed in the backup modem?\u003c\/h4\u003e\u003cp\u003eA P3717 1:N interface card fitted in the backup modem and an umbilical cable to the switch; any production modem with the card can then also control the switch.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Teledyne%20Paradise%20Datacom%20PDQS%201%3AN%20Modem%20Redundancy%20Switch\u0026amp;mpn=PDQS\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Teledyne Paradise Datacom","offers":[{"title":"Default Title","offer_id":67972065100143,"sku":"PDC-PDQS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/teledyne-paradise-datacom-pdqs-1-n-modem-redundancy-switch.jpg?v=1793924569"},{"product_id":"st-engineering-idirect-uss0202","title":"ST Engineering iDirect USS0202 Redundancy Switch","description":"\u003cp\u003eThe ST Engineering iDirect USS0202 (formerly Newtec) is a universal 1+1 and N+1 redundancy switch controlling up to 36 switching modules.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0203\"\u003eUSS0203\u003c\/a\u003e: the extension unit for the USS0202, adding switching modules for large N+1 configurations (up to seven per system), Extension unit for USS0202\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0212\"\u003eUSS0212\u003c\/a\u003e: a compact 1+1 redundancy switch for modulators, demodulators and modems in IP head-ends, 1+1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/st-engineering-idirect-uss-universal-redundancy-switches\"\u003eCompare all 3 ST Engineering iDirect USS Universal Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eUSS0202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eST Engineering iDirect USS Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitched signals\u003c\/th\u003e\n\u003ctd\u003eASI, IP (logical GbE), IF, L-band, RF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003ctd\u003eSNMP, web GUI, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual redundant supplies with monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eMain unit; 1+1 to 16+1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ST%20Engineering%20iDirect%20USS0202%20Redundancy%20Switch\u0026amp;mpn=USS0202\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ST Engineering iDirect","offers":[{"title":"Default Title","offer_id":67973025595759,"sku":"STE-USS0202","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/st-engineering-idirect-uss0202-redundancy-switch.png?v=1793924737"},{"product_id":"st-engineering-idirect-uss0203","title":"ST Engineering iDirect USS0203 Redundancy Switch Extension Unit","description":"\u003cp\u003eThe ST Engineering iDirect USS0203 (formerly Newtec) is the extension unit for the USS0202, adding switching modules for large N+1 configurations (up to seven per system).\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0202\"\u003eUSS0202\u003c\/a\u003e: a universal 1+1 and N+1 redundancy switch controlling up to 36 switching modules, Main unit; 1+1 to 16+1\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0212\"\u003eUSS0212\u003c\/a\u003e: a compact 1+1 redundancy switch for modulators, demodulators and modems in IP head-ends, 1+1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/st-engineering-idirect-uss-universal-redundancy-switches\"\u003eCompare all 3 ST Engineering iDirect USS Universal Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eUSS0203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eST Engineering iDirect USS Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitched signals\u003c\/th\u003e\n\u003ctd\u003eASI, IP (logical GbE), IF, L-band, RF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003ctd\u003eSNMP, web GUI, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual redundant supplies with monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExtension unit for USS0202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ST%20Engineering%20iDirect%20USS0203%20Redundancy%20Switch%20Extension%20Unit\u0026amp;mpn=USS0203\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ST Engineering iDirect","offers":[{"title":"Default Title","offer_id":67973025661295,"sku":"STE-USS0203","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/st-engineering-idirect-uss0203-redundancy-switch-extension-unit.png?v=1793924736"},{"product_id":"st-engineering-idirect-uss0212","title":"ST Engineering iDirect USS0212 Redundancy Switch","description":"\u003cp\u003eThe ST Engineering iDirect USS0212 (formerly Newtec) is a compact 1+1 redundancy switch for modulators, demodulators and modems in IP head-ends.\u003c\/p\u003e\u003ch3\u003eOther models in this series\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0202\"\u003eUSS0202\u003c\/a\u003e: a universal 1+1 and N+1 redundancy switch controlling up to 36 switching modules, Main unit; 1+1 to 16+1\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/st-engineering-idirect-uss0203\"\u003eUSS0203\u003c\/a\u003e: the extension unit for the USS0202, adding switching modules for large N+1 configurations (up to seven per system), Extension unit for USS0202\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/st-engineering-idirect-uss-universal-redundancy-switches\"\u003eCompare all 3 ST Engineering iDirect USS Universal Redundancy Switches models\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eUSS0212\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eST Engineering iDirect USS Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitched signals\u003c\/th\u003e\n\u003ctd\u003eASI\/G.703, IF or L-band; logical GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003ctd\u003eSNMP, web GUI, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual redundant supplies with monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e1+1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ST%20Engineering%20iDirect%20USS0212%20Redundancy%20Switch\u0026amp;mpn=USS0212\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ST Engineering iDirect","offers":[{"title":"Default Title","offer_id":67973025726831,"sku":"STE-USS0212","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/st-engineering-idirect-uss0212-redundancy-switch.jpg?v=1793924739"},{"product_id":"calian-itus-rf-redundancy-switch","title":"Calian Itus 1:1 L-Band Modulator Redundancy Switch","description":"\u003cp\u003eThe Calian Itus is a 1:1 L-band redundancy switch for modulators and modems with alarm contacts, covering 950 to 2150 MHz. In automatic mode it switches in about 100 ms (250 ms maximum), and it can also switch on the quality of the incoming signals, demodulating up to 16 DVB-S\/S2 carriers to watch lock, MER, frame errors and power. Dual independent power supplies give an MTBF over a million hours.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1:1 redundancy for any alarm-contact modulator or modem\u003c\/li\u003e\n\u003cli\u003e100 ms typical, 250 ms maximum switching\u003c\/li\u003e\n\u003cli\u003eSwitches on modulator alarms or on DVB-S\/S2 signal quality\u003c\/li\u003e\n\u003cli\u003eDual redundant power supplies; MTBF \u0026gt;1,000,000 h\u003c\/li\u003e\n\u003cli\u003eWeb UI and SNMP v2c\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eItus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eCalian Itus RF Redundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e950–2150 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e1:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitching time\u003c\/th\u003e\n\u003ctd\u003e100 ms typical, 250 ms max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInsertion loss\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 3 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003e45 dB min at 2 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarm interfaces\u003c\/th\u003e\n\u003ctd\u003e2 x 15-pin D-sub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e19 in 1RU, 5.5 in deep, 7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMTBF\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 1,000,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRedundant uplink modulator chains\u003c\/li\u003e\n\u003cli\u003eBroadcast and teleport protection switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes Digisat supply and support Calian equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Calian satcom products with quote-based pricing for government, teleport and enterprise buyers, and our engineers can help specify, integrate, install and support them.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Calian%20Itus%201%3A1%20L-Band%20Modulator%20Redundancy%20Switch\u0026amp;mpn=Itus\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Calian","offers":[{"title":"Default Title","offer_id":67977646211439,"sku":"CAL-ITUS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/calian-itus-rf-redundancy-switch-1-1-l-band-redundancy-switch.webp?v=1793924913"},{"product_id":"idc-rscc-t-redundancy-switch","title":"International Datacasting RSCC-T Redundancy Switch","description":"\u003cp\u003eThe International Datacasting (IDC) RSCC-T Redundancy Switch is a redundancy switch: redundancy switching for modulators, etc. with options from 1:1 up to 8:1. The RSCC-T Series Redundancy Switch is used for 1:1 redundancy configuration for Upconverters, Downconverters, Modulator-Upconverters, Transport Stream Modulators, Demodulators, and Modems. It comes standard with a coaxial signal switch for the input signal and a coaxial signal switch for the output signal. The switch is capable to control external waveguide transfer switches as an option for LNAs or even HPAs.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdaptable 1:1 Redundancy: Supports 1:1 redundancy for diverse equipment, ensuring seamless switchover and uninterrupted operations.\u003c\/li\u003e\n\u003cli\u003eEfficient Signal Control: Equipped with coaxial signal switches for input and output, optimizing signal routing and enhancing performance.\u003c\/li\u003e\n\u003cli\u003eReliable Control and Availability: Enables control via multiple interfaces, with automatic\/manual switchover, dual power supplies, and AC connectors for continuous functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eRSCC-T Redundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eInternational Datacasting RSCC-T Redundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRedundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e1:1 redundancy (up to 8:1 options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitches\u003c\/th\u003e\n\u003ctd\u003eInput IF and output RF coaxial switches; optional outdoor switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eFront panel, RS-232, RS-422\/485 or Ethernet; automatic or manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual supplies; optional DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtects\u003c\/th\u003e\n\u003ctd\u003eModulators, converters, HPAs, LNAs and LNBs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTeleport uplink and downlink chains\u003c\/li\u003e\n\u003cli\u003eUnmanned earth stations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes Digisat supply and support International Datacasting equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies IDC receivers, encoders, decoders, multiplexers and network software with quote-based pricing for broadcasters, radio networks, government and enterprise buyers, and our engineers can help design the distribution network, integrate the uplink and receive sites, and support installed IDC systems, including discontinued models.\u003c\/p\u003e\u003ch4\u003eIs International Datacasting part of Novra?\u003c\/h4\u003e\u003cp\u003eYes. International Datacasting (IDC) is a Novra Group company. IDC products continue under the IDC name, and Digisat supplies both current IDC products and support for installed IDC receivers and encoders.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=International%20Datacasting%20RSCC-T%20Redundancy%20Switch\u0026amp;mpn=RSCC-T%20Redundancy%20Switch\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"International Datacasting","offers":[{"title":"Default Title","offer_id":67979228316015,"sku":"IDC-RSCC-T","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/international-datacasting-redundancy-switch.png?v=1793925248"},{"product_id":"sencore-vb273-dvb-s2-redundancy-switch-kit","title":"Sencore VB273 DVB-S2 Redundancy Switch Kit","description":"\u003cp\u003eThe Sencore VB273 is an intelligent 2:1 redundancy switch that also monitors both satellite signal paths, so switching decisions are based on deep analysis of each signal. It takes two post-modulator inputs and feeds one transmit output, watching every ETSI TR 101 290 parameter and switching only when the other path is clean. Magnetically latched relays hold their state and pass the signal even with power off. It comes as an IF kit (70\/140 MHz) or an L-band kit (950-2150 MHz), each with the VB300 1RU chassis, VB120D probe, VB272 demodulator and licenses.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2:1 redundancy switching driven by built-in signal monitoring\u003c\/li\u003e\n\u003cli\u003eSwitch and VideoBRIDGE probe in one\u003c\/li\u003e\n\u003cli\u003e70\/140 MHz IF or 950-2150 MHz L-band versions\u003c\/li\u003e\n\u003cli\u003eSwitches on any TR 101 290 priority 1\/2\/3 parameter\u003c\/li\u003e\n\u003cli\u003eLatching relays hold state through power loss\u003c\/li\u003e\n\u003cli\u003ePassive loop-through when powered down\u003c\/li\u003e\n\u003cli\u003eAutonomous, remote or local control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eVB273\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eSencore VB273\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eVB273\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSatellite Redundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitching\u003c\/th\u003e\n\u003ctd\u003e2:1, two post-modulator inputs to one transmit output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eVB273-KIT (70\/140 MHz IF); VB273-LBAND-KIT (950-2150 MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit contents\u003c\/th\u003e\n\u003ctd\u003eVB300 1RU chassis, VB120D probe, VB272 DVB-S\/S2 module, VB273, licenses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModulations monitored\u003c\/th\u003e\n\u003ctd\u003eDVB-S QPSK; DVB-S2 QPSK, 8PSK, 16APSK, 32APSK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitch triggers\u003c\/th\u003e\n\u003ctd\u003eAll TR 101 290 P1\/P2\/P3 parameters, CA checks, RF levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRelays\u003c\/th\u003e\n\u003ctd\u003eMagnetically latched; passive loop-through when unpowered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eAutonomous, NMS remote, front panel, SuperLocal override\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100-240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e0 to 45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRedundancy between two satellite uplink chains\u003c\/li\u003e\n\u003cli\u003eKeeping the best signal path on air automatically\u003c\/li\u003e\n\u003cli\u003eLights-out uplink facilities\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eDoes Digisat supply and support Sencore equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Sencore receiver decoders, satellite modulators, contribution encoders, chassis and monitoring with quote-based pricing for broadcasters, cable and IPTV operators, government and enterprise buyers, and our engineers can help integrate them with your antennas, LNBs, BUCs and uplink chain.\u003c\/p\u003e\u003ch4\u003eWhat happened to Wellav products?\u003c\/h4\u003e\u003cp\u003eWellav products are now sold and supported by Sencore. The DMP 900 platform continues under the Sencore name, and older Wellav encoders, IRDs, transcoders and QAM processors are replaced by the DMP 900 or by current Sencore receiver decoders. Digisat can help you choose the right replacement.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Sencore%20VB273%20DVB-S2%20Redundancy%20Switch%20Kit\u0026amp;mpn=VB273\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sencore","offers":[{"title":"Default Title","offer_id":67979624939887,"sku":"SEN-VB273","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/sencore-vb273.png?v=1793925249"},{"product_id":"novelsat-nsr9100-1-1-modem-redundancy-switch","title":"Novelsat NSR9100 1:1 Modem Redundancy Switch","description":"\u003cp\u003eThe Novelsat NSR9100 is a 1RU redundancy switch that protects a modulator, demodulator or modem with a hot backup unit. It switches IF, L-band (with BUC feed pass-through up to 48 V \/ 4 A on the 1:1 card), ASI and IP paths automatically on alarm contacts or manually from the front panel, web GUI or NMS, and copies the protected unit's configuration to the backup for a seamless changeover. Extractable switching cards and dual redundant power supplies keep the switch itself highly available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic 1+1 protection of modulators, demodulators and modems\u003c\/li\u003e\n\u003cli\u003eSwitches IF, L-band, ASI and IP (GbE) paths\u003c\/li\u003e\n\u003cli\u003eConfiguration copy to the backup unit\u003c\/li\u003e\n\u003cli\u003eBUC feed pass-through up to 48 V \/ 4 A (1:1 L-band card)\u003c\/li\u003e\n\u003cli\u003eExtractable switching cards\u003c\/li\u003e\n\u003cli\u003eDual redundant power supplies\u003c\/li\u003e\n\u003cli\u003eWeb GUI, CLI, SNMP and front panel control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eNSR9100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eNovelsat NSR9100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eNSR9100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRedundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRedundancy\u003c\/th\u003e\n\u003ctd\u003e1+1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitched interfaces\u003c\/th\u003e\n\u003ctd\u003eIF\/ASI (BNC 75 Ω, DC-500 MHz), L-band (500-2500 MHz), E1, GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\/ASI path\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 1.5 dB loss, \u0026gt; 80 dB isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eL-band path\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 2.5 dB loss, \u0026gt; 60 dB isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC pass-through\u003c\/th\u003e\n\u003ctd\u003e18 V \/ 1 A standard; 48 V \/ 4 A on 1:1 L-band TX port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarms\u003c\/th\u003e\n\u003ctd\u003e8 alarm inputs, 8 outputs (D-sub)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003ctd\u003eWeb GUI, CLI, SNMP, RS-232, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual redundant supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1RU: 4.3 x 43.9 x 44 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e0 to 50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTeleport and broadcast uplink redundancy\u003c\/li\u003e\n\u003cli\u003eCritical modem links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhat is the NOVELSAT NS4 waveform?\u003c\/h4\u003e\u003cp\u003eNS4 is Novelsat's proprietary satellite waveform. It gains spectral efficiency over DVB-S2X through very tight roll-off (down to 2%) and advanced coding, so the same transponder carries more data or video. Novelsat equipment also runs standard DVB-S2 and DVB-S2X, so it works with existing networks.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply and support Novelsat equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Novelsat modulators, demodulators, modems, redundancy switches, hubs and gateways with quote-based pricing for broadcasters, teleports, government and enterprise buyers, and our engineers can help design the link, size the carrier with the NS4 waveform and integrate it with your RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Novelsat%20NSR9100%201%3A1%20Modem%20Redundancy%20Switch\u0026amp;mpn=NSR9100\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Novelsat","offers":[{"title":"Default Title","offer_id":67982192345455,"sku":"NSL-NSR9100","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/novelsat-nsr9100.png?v=1793925585"},{"product_id":"novelsat-nsr9800-1-n-modem-redundancy-switch","title":"Novelsat NSR9800 1:N Modem Redundancy Switch","description":"\u003cp\u003eThe Novelsat NSR9800 is a 3RU N+1 redundancy switch that protects up to eight modulators, demodulators or modems with a single backup unit, and cascades for larger systems. It switches IF, L-band, ASI and IP paths automatically on alarm contacts or manually from the front panel, web GUI or NMS, copying the failed unit's configuration to the backup so service continues seamlessly. Extractable switching cards let operators mix interface types, and dual redundant power supplies protect the switch itself.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScalable N+1 protection, up to 8+1\u003c\/li\u003e\n\u003cli\u003eCascadable for more than 8 units\u003c\/li\u003e\n\u003cli\u003eSwitches IF, L-band, ASI and IP (GbE) paths\u003c\/li\u003e\n\u003cli\u003eConfiguration copy to the backup unit\u003c\/li\u003e\n\u003cli\u003eMix-and-match extractable switching cards\u003c\/li\u003e\n\u003cli\u003eDual redundant power supplies\u003c\/li\u003e\n\u003cli\u003eWeb GUI, CLI, SNMP and front panel control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eNSR9800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eNovelsat NSR9800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eNSR9800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRedundancy Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRedundancy\u003c\/th\u003e\n\u003ctd\u003eN+1, up to 8+1; cascadable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitched interfaces\u003c\/th\u003e\n\u003ctd\u003eIF\/ASI (BNC 75 Ω, DC-500 MHz), L-band (500-2500 MHz), E1, GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIF\/ASI path\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 1.5 dB loss, \u0026gt; 80 dB isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eL-band path\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 2.5 dB loss, \u0026gt; 60 dB isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlarms\u003c\/th\u003e\n\u003ctd\u003e8 alarm inputs, 8 outputs (D-sub)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003ctd\u003eWeb GUI, CLI, SNMP, RS-232, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eDual redundant supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3RU: 13 x 43.9 x 31.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e0 to 50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTeleport and broadcast uplink redundancy\u003c\/li\u003e\n\u003cli\u003eMulti-carrier hub and distribution sites\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhat is the NOVELSAT NS4 waveform?\u003c\/h4\u003e\u003cp\u003eNS4 is Novelsat's proprietary satellite waveform. It gains spectral efficiency over DVB-S2X through very tight roll-off (down to 2%) and advanced coding, so the same transponder carries more data or video. Novelsat equipment also runs standard DVB-S2 and DVB-S2X, so it works with existing networks.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply and support Novelsat equipment?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies Novelsat modulators, demodulators, modems, redundancy switches, hubs and gateways with quote-based pricing for broadcasters, teleports, government and enterprise buyers, and our engineers can help design the link, size the carrier with the NS4 waveform and integrate it with your RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=Novelsat%20NSR9800%201%3AN%20Modem%20Redundancy%20Switch\u0026amp;mpn=NSR9800\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"Novelsat","offers":[{"title":"Default Title","offer_id":67982192410991,"sku":"NSL-NSR9800","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/novelsat-nsr9800.png?v=1793925585"}],"url":"https:\/\/digisat.org\/collections\/modem-redundancy-switches.oembed","provider":"Digisat International","version":"1.0","type":"link"}