{"title":"ETI","description":"\u003cp\u003eETI (Environmental Technology, Inc.) has made Snow Switch snow and ice melting sensors in the USA since 1968 and builds the NetCom line of waveguide dehydrators: the network-monitored ADH NetCom, small-system EDH dehydrators, passive RCD units and air distribution manifolds, plus Snow Switch controllers and sensors.\u003c\/p\u003e\u003cp\u003eDigisat supplies ETI equipment with quote-based pricing for government, teleport and enterprise buyers, accepts purchase orders and GPC, and our engineers can help size, integrate, install and support the equipment. Browse 18 ETI part numbers below.\u003c\/p\u003e","products":[{"product_id":"eti-adh-netcom-automatic-waveguide-air-dehydrator","title":"ETI ADH NetCom Automatic Waveguide Air Dehydrator","description":"\u003cp\u003eThe ETI ADH NetCom is an automatic, regenerating air dehydrator that keeps antenna waveguide and dielectric coaxial cable filled with dry, pressurized air so moisture never degrades the signal. A brushless dual-diaphragm compressor feeds aluminum-oxide desiccant canisters that regenerate on measured dew point rather than a fixed timer, saving energy and desiccant. Output pressure is programmable from 0.3 to 7.5 psig, and the unit is monitored and controlled over Ethernet with a web interface or SNMP, with RS-422\/485, RS-232 and three alarm relays for legacy systems. It fits 3U of rack space (or mounts on a wall), runs from 100-240 VAC or optional ±20-75 VDC, and supports master\/slave operation for parallel or redundant pumping.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic, dew-point-triggered desiccant regeneration\u003c\/li\u003e\n\u003cli\u003eProgrammable output 0.3-7.5 psig\u003c\/li\u003e\n\u003cli\u003eBrushless dual-diaphragm compressor\u003c\/li\u003e\n\u003cli\u003eWeb interface and SNMP over Ethernet; RS-422\/485, RS-232\u003c\/li\u003e\n\u003cli\u003eThree programmable alarm relays\u003c\/li\u003e\n\u003cli\u003eMaster\/slave operation for parallel or redundant pumping\u003c\/li\u003e\n\u003cli\u003e3U rack, single-post or wall mounting\u003c\/li\u003e\n\u003cli\u003eSoftware updates in service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eADH NetCom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI ADH NetCom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eADH NetCom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAutomatic regenerating air dehydrator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput pressure\u003c\/th\u003e\n\u003ctd\u003e0.3-7.5 psig (20.7-517 mbar), default 0.5 psig\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum dew point\u003c\/th\u003e\n\u003ctd\u003e-40 °F\/°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet (HTTP, SNMP, UDP, TFTP, TCP), RS-422\/485, RS-232, 3 Form C alarm relays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100-240 VAC 50\/60 Hz; optional ±20-75 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower use\u003c\/th\u003e\n\u003ctd\u003e40 W typical, 150 W max (regeneration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e17 x 12.25 x 5.25 in (3U)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16 lb (7.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eDual-post rack, single-post rack or wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20ADH%20NetCom%20Automatic%20Waveguide%20Air%20Dehydrator\u0026amp;mpn=ADH%20NetCom\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765293935,"sku":"ETI-ADH-NETCOM","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-adh-netcom.png?v=1793910292"},{"product_id":"eti-adh-netcom-nema-outdoor-waveguide-air-dehydrator","title":"ETI ADH NetCom NEMA Outdoor Waveguide Air Dehydrator","description":"\u003cp\u003eThe ETI ADH NetCom NEMA puts the full ADH NetCom automatic dehydrator into a lightweight IP66, NEMA 4X polycarbonate enclosure for outdoor, mobile and high-vibration installations, such as antenna pads, transportable earth stations and vehicles. It delivers up to 25.4 scfh (12 lpm) of dry air at a programmable 0.3-7.5 psig with a -40 °F\/°C dew point, regenerates its desiccant on measured humidity, and is monitored over Ethernet (web or SNMP) with RS-422\/485, RS-232 and alarm relays. Versions with military-style Type 1 or Type 2 connectors are available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIP66 \/ NEMA 4X outdoor enclosure\u003c\/li\u003e\n\u003cli\u003eBuilt to flex without damage in mobile and high-vibration use\u003c\/li\u003e\n\u003cli\u003eUp to 25.4 scfh (12 lpm) dry air\u003c\/li\u003e\n\u003cli\u003eProgrammable 0.3-7.5 psig\u003c\/li\u003e\n\u003cli\u003eWeb interface, SNMP, RS-422\/485, RS-232 and alarm relays\u003c\/li\u003e\n\u003cli\u003eOptional Type 1 or Type 2 mil-spec connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eADH NetCom NEMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI ADH NetCom NEMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eADH NetCom NEMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAutomatic regenerating air dehydrator, outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eIP66, NEMA 4X polycarbonate, hinged and lockable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e25.4 scfh (12 lpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput pressure\u003c\/th\u003e\n\u003ctd\u003e0.3-7.5 psig (20.7-517 mbar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum dew point\u003c\/th\u003e\n\u003ctd\u003e-40 °F\/°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100-240 VAC 50\/60 Hz, 150 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e15.42 x 18.67 x 8.38 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDischarge\u003c\/th\u003e\n\u003ctd\u003e1\/8 in NPT; 3\/8 or 1\/4 in hose barb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003eType 1 or Type 2 mil-spec connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20ADH%20NetCom%20NEMA%20Outdoor%20Waveguide%20Air%20Dehydrator\u0026amp;mpn=ADH%20NetCom%20NEMA\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765359471,"sku":"ETI-ADH-NETCOM-NEMA","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-adh-netcom-nema.png?v=1793910292"},{"product_id":"eti-edh-4-small-system-waveguide-air-dehydrator","title":"ETI EDH-4 Small-System Waveguide Air Dehydrator","description":"\u003cp\u003eThe ETI EDH-4 is a low-volume, non-regenerating dehydrator that automatically pressurizes small waveguide and coax runs, especially C, X, Ku and Ka-band feeds. It supplies dry air at 0.87 psig with up to 6.0 scfh of flow for systems under 18 cubic feet, shows pressure and status on an LED display, and has a front window onto its color-indicating desiccant plus an hours-based reminder to check it. The desiccant canister lifts out from the front for replacement or manual regeneration without tools.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor small systems up to 18 cu ft (510 L)\u003c\/li\u003e\n\u003cli\u003e0.87 psig output, up to 6.0 scfh\u003c\/li\u003e\n\u003cli\u003eC, X, Ku and Ka-band waveguide and coax\u003c\/li\u003e\n\u003cli\u003eColor-indicating desiccant with front viewing window\u003c\/li\u003e\n\u003cli\u003eTool-free desiccant canister change\u003c\/li\u003e\n\u003cli\u003eEnglish or SI display units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eEDH-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI EDH-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEDH-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-regenerating single-canister desiccant dehydrator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput pressure\u003c\/th\u003e\n\u003ctd\u003e0.87 psig (59.9 mbar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e6.0 scfh (2.8 lpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e18 cu ft (510 L) standard, 45 cu ft max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDischarge\u003c\/th\u003e\n\u003ctd\u003e1\/8 in NPT female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBands\u003c\/th\u003e\n\u003ctd\u003eC, X, Ku, Ka\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20EDH-4%20Small-System%20Waveguide%20Air%20Dehydrator\u0026amp;mpn=EDH-4\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765392239,"sku":"ETI-EDH-4","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-edh-4.png?v=1793910292"},{"product_id":"eti-edh-5-low-pressure-waveguide-air-dehydrator","title":"ETI EDH-5 Low-Pressure Waveguide Air Dehydrator","description":"\u003cp\u003eThe ETI EDH-5 is a compact, manually regenerated low-pressure dehydrator for remote and mobile antenna transmission lines, well suited to small Ku and Ka-band waveguide and coax. It discharges dry air at 0.5 psig and up to 4.77 scfh with a typical dew point as low as -40 °F\/°C, runs from 100-240 VAC anywhere in the world, and operates from -40 to 130 °F indoors or out. A microcontroller manages pressure and limits continuous pumping to four hours if there is a severe leak, and the desiccant container changes from the front without removing the unit.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall footprint for remote and mobile sites\u003c\/li\u003e\n\u003cli\u003e0.5 psig output, up to 4.77 scfh\u003c\/li\u003e\n\u003cli\u003eTypical dew point to -40 °F\/°C\u003c\/li\u003e\n\u003cli\u003eAuto-select 100-240 VAC\u003c\/li\u003e\n\u003cli\u003eOperates -40 to 130 °F (-40 to 55 °C)\u003c\/li\u003e\n\u003cli\u003eLeak protection limits pumping to 4 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eEDH-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI EDH-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEDH-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eManually regenerated low-pressure dehydrator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput pressure\u003c\/th\u003e\n\u003ctd\u003e0.5 psig (34.5 mbar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e4.77 scfh (2.25 lpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDew point\u003c\/th\u003e\n\u003ctd\u003eAs low as -40 °F\/°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100-240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e-40 to 130 °F (-40 to 55 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBands\u003c\/th\u003e\n\u003ctd\u003eKu, Ka\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20EDH-5%20Low-Pressure%20Waveguide%20Air%20Dehydrator\u0026amp;mpn=EDH-5\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765425007,"sku":"ETI-EDH-5","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-edh-5.png?v=1793910291"},{"product_id":"eti-rcd-passive-and-self-pumping-waveguide-dehydrators","title":"ETI RCD Passive and Self-Pumping Waveguide Dehydrators","description":"\u003cp\u003eETI RCD passive dehydrators keep small, sealed waveguide and coax systems dry with no power, and give larger systems short-term protection during outages, maintenance, storage or transport. The RCD-1, -3 and -5 are desiccant canisters that dry the line by gas diffusion through a 1\/8 in NPT fitting; the RCD-2, -4 and -6 Self-Pumping models add a sensitive check valve that uses temperature and barometric changes to draw dried air in and hold the line at a slight positive pressure, so dry air leaks out rather than moist air in. Desiccant typically lasts 12 to 18 months.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo power required\u003c\/li\u003e\n\u003cli\u003eRCD-1\/3\/5 diffusion and RCD-2\/4\/6 Self-Pumping models\u003c\/li\u003e\n\u003cli\u003eHolds a slight positive pressure (Self-Pumping)\u003c\/li\u003e\n\u003cli\u003eTypical desiccant life 12-18 months\u003c\/li\u003e\n\u003cli\u003e1\/8 in NPT connection\u003c\/li\u003e\n\u003cli\u003eShort-term protection during outages and transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eRCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI RCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive desiccant dehydrator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModels\u003c\/th\u003e\n\u003ctd\u003eRCD-1 to RCD-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelf-Pumping\u003c\/th\u003e\n\u003ctd\u003eRCD-2, RCD-4, RCD-6 (check valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003e1\/8 in NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesiccant life\u003c\/th\u003e\n\u003ctd\u003eTypically 12-18 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20RCD%20Passive%20and%20Self-Pumping%20Waveguide%20Dehydrators\u0026amp;mpn=RCD\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765457775,"sku":"ETI-RCD","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-rcd.png?v=1793910292"},{"product_id":"eti-asm-1-smart-automated-air-distribution-manifold","title":"ETI ASM-1 Smart Automated Air Distribution Manifold","description":"\u003cp\u003eThe ETI ASM-1 Smart Manifold distributes low-pressure dry air from one or more dehydrators to one or more antenna transmission lines and reports pressure, status and leak-down rate for every port. Seven of its eight ports can be set as inputs or outputs, the eighth is a relief valve that bleeds off excess pressure from solar gain, and output pressure is configurable from 0.1 to 7.5 psig. It is managed over Ethernet with a web interface or SNMP (plus RS-422\/485, RS-232 and three alarm relays) and can run several ADH NetCom dehydrators together for parallel or redundant pumping.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePer-port pressure, status and leak-down rate\u003c\/li\u003e\n\u003cli\u003e7 configurable ports plus a relief port\u003c\/li\u003e\n\u003cli\u003eOutput 0.1-7.5 psig in 0.01 psig steps\u003c\/li\u003e\n\u003cli\u003eParallel or redundant ADH NetCom pumping\u003c\/li\u003e\n\u003cli\u003eWeb interface, SNMP, RS-422\/485, RS-232 and alarm relays\u003c\/li\u003e\n\u003cli\u003e3U rack, 11 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eASM-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI ASM-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eASM-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAutomated air distribution manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e8 (7 configurable input\/output, 1 relief)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput pressure\u003c\/th\u003e\n\u003ctd\u003e0.10-7.50 psig (7-517 mbar), default 0.5 psig\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eEthernet (web, SNMP), RS-422\/485, RS-232, 3 alarm relays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e17 x 12 x 5.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11 lb (5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eDual-post rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20ASM-1%20Smart%20Automated%20Air%20Distribution%20Manifold\u0026amp;mpn=ASM-1\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765523311,"sku":"ETI-ASM-1","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-asm-1.png?v=1793910291"},{"product_id":"eti-rcm-2-air-distribution-manifold","title":"ETI RCM-2 Air Distribution Manifold","description":"\u003cp\u003eThe ETI RCM-2 is a low-cost, machined air distribution manifold that lets one dehydrator serve several antennas, with nine valve-controlled ports to monitor the system, identify and isolate leaking lines, or run several dehydrators in parallel. Its vertical mounting saves shelter wall space while keeping the valves accessible, manifolds can be cascaded for larger systems, and high and low pressure versions are available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNine valve-controlled ports\u003c\/li\u003e\n\u003cli\u003eShare one dehydrator across several antennas\u003c\/li\u003e\n\u003cli\u003eIdentify and isolate leaking lines\u003c\/li\u003e\n\u003cli\u003eParallel several dehydrators\u003c\/li\u003e\n\u003cli\u003eSpace-saving vertical mounting\u003c\/li\u003e\n\u003cli\u003eCascadable; high and low pressure versions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eRCM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI RCM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRCM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eManual air distribution manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e9 valve-controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eVertical wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eHigh and low pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhy do satellite antenna waveguides need a dehydrator?\u003c\/h4\u003e\u003cp\u003eMoisture that condenses inside waveguide and coax raises loss and VSWR, corrodes the line and can arc at high power. A dehydrator keeps the line filled with dry air at a slight positive pressure so moist air cannot leak in; Digisat can size the dehydrator and manifold to your waveguide runs and antennas.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20RCM-2%20Air%20Distribution%20Manifold\u0026amp;mpn=RCM-2\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765556079,"sku":"ETI-RCM-2","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-rcm-2.png?v=1793910291"},{"product_id":"eti-snow-switch-aps-3c-snow-ice-melting-control-panel","title":"ETI Snow Switch APS-3C Snow\/Ice Melting Control Panel","description":"\u003cp\u003eThe ETI Snow Switch APS-3C is an automatic snow and ice melting control panel that switches de-icing heaters on only when its sensors detect snow or ice, keeping operating costs to a minimum on antennas, roofs, gutters and pavement. It drives electrically or mechanically held contactors for pilot-duty heaters, works with MI, constant-wattage and self-limiting heaters, holds heaters on for up to 10 hours after snow stops, and includes a 40-90 °F high-limit thermostat and an energy management computer interface. It replaces the earlier APS-3, and the optional RCU-3 remote duplicates its controls.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSensor-driven automatic heater control\u003c\/li\u003e\n\u003cli\u003eHold-on timer up to 10 hours\u003c\/li\u003e\n\u003cli\u003eMI, constant-wattage and self-limiting heaters\u003c\/li\u003e\n\u003cli\u003eCalibrated 40-90 °F high-limit thermostat (sensor included)\u003c\/li\u003e\n\u003cli\u003eEnergy management computer (EMC) interface\u003c\/li\u003e\n\u003cli\u003eMultiple sensors; optional RCU-3 remote\u003c\/li\u003e\n\u003cli\u003eC-UL-US listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAPS-3C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI APS-3C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAPS-3C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting control panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater control\u003c\/th\u003e\n\u003ctd\u003ePilot duty via electrically or mechanically held contactors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eAdjustable, up to 10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh limit\u003c\/th\u003e\n\u003ctd\u003e40-90 °F (4-32 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eMultiple ETI sensors, EMC relay, optional RCU-3 remote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eListing\u003c\/th\u003e\n\u003ctd\u003eC-UL-US\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eAPS-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20APS-3C%20Snow%2FIce%20Melting%20Control%20Panel\u0026amp;mpn=APS-3C\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765621615,"sku":"ETI-APS-3C","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-aps-3c.png?v=1793925838"},{"product_id":"eti-snow-switch-aps-4c-snow-ice-melting-control-panel","title":"ETI Snow Switch APS-4C Snow\/Ice Melting Control Panel","description":"\u003cp\u003eThe ETI Snow Switch APS-4C is an automatic snow and ice melting control panel for commercial and industrial de-icing systems, with patented, self-testing ground-fault equipment protection (GFEP) as the US and Canadian electrical codes require. It controls MI, constant-wattage and self-limiting heaters from one or more ETI sensors, holds heaters on for up to 10 hours after snow stops, and acts as the master for any number of SC-40C satellite contactors in larger systems. Trip current is 30 mA by default (60 or 120 mA selectable), and it includes an EMC interface and the optional RCU-4 remote.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSelf-testing ground-fault equipment protection (30, 60 or 120 mA)\u003c\/li\u003e\n\u003cli\u003eMaster for SC-40C satellite contactors\u003c\/li\u003e\n\u003cli\u003eHold-on timer up to 10 hours\u003c\/li\u003e\n\u003cli\u003eMI, constant-wattage and self-limiting heaters\u003c\/li\u003e\n\u003cli\u003eEMC interface; optional RCU-4 remote\u003c\/li\u003e\n\u003cli\u003eC-UL-US listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAPS-4C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI APS-4C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAPS-4C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting control panel with GFEP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGFEP trip current\u003c\/th\u003e\n\u003ctd\u003e30 mA default; 60 or 120 mA selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eAdjustable, up to 10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpansion\u003c\/th\u003e\n\u003ctd\u003eSC-40C satellite contactors (unlimited)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eMultiple ETI sensors, EMC relay, optional RCU-4 remote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eListing\u003c\/th\u003e\n\u003ctd\u003eC-UL-US\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eAPS-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20APS-4C%20Snow%2FIce%20Melting%20Control%20Panel\u0026amp;mpn=APS-4C\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765654383,"sku":"ETI-APS-4C","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-aps-4c.png?v=1793925838"},{"product_id":"eti-snow-switch-sc-40c-modular-heater-contactor","title":"ETI Snow Switch SC-40C Modular Heater Contactor","description":"\u003cp\u003eThe ETI Snow Switch SC-40C is a satellite contactor that adds heater circuits to a snow melting system mastered by an APS-4C control panel, so large de-icing systems can be built in modules. Each SC-40C has its own 30 mA ground-fault equipment protection, which shuts down only the faulty circuit while the rest keep heating, plus its own adjustable hold-on timer, automatic and manual-override controls and optional remote operation, in a NEMA 3R enclosure. There is no limit to how many SC-40Cs one system can use.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModular expansion of APS-4C systems\u003c\/li\u003e\n\u003cli\u003eIntegral 30 mA GFEP per circuit\u003c\/li\u003e\n\u003cli\u003eIsolates faulty heater circuits\u003c\/li\u003e\n\u003cli\u003eAdjustable hold-on up to 10 hours\u003c\/li\u003e\n\u003cli\u003eNEMA 3R enclosure\u003c\/li\u003e\n\u003cli\u003eUL listed temperature-regulating equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSC-40C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI SC-40C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSC-40C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting satellite contactor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaster\u003c\/th\u003e\n\u003ctd\u003eAPS-4C control panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGFEP\u003c\/th\u003e\n\u003ctd\u003eIntegral 30 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eUp to 10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eNEMA 3R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eListing\u003c\/th\u003e\n\u003ctd\u003eUL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20SC-40C%20Modular%20Heater%20Contactor\u0026amp;mpn=SC-40C\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765687151,"sku":"ETI-SC-40C","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-sc-40c.png?v=1793925838"},{"product_id":"eti-snow-switch-gf-pro-snow-ice-melting-control","title":"ETI Snow Switch GF Pro Snow\/Ice Melting Control","description":"\u003cp\u003eThe ETI Snow Switch GF Pro is an automatic snow and ice melting control with built-in, self-testing 30 mA ground-fault equipment protection that is digitally filtered against false trips. It takes up to two ETI sensors, such as a CIT-1 aerial sensor with a GIT-1 gutter or SIT-6E pavement sensor, and runs heaters only when they detect moisture below 38 °F, with an adjustable hold-on of up to 8 hours and manual override. The optional RCU-4 remote adds convenient monitoring and control.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 30 mA self-testing GFEP\u003c\/li\u003e\n\u003cli\u003eUp to two ETI snow\/ice sensors\u003c\/li\u003e\n\u003cli\u003eHold-on up to 8 hours\u003c\/li\u003e\n\u003cli\u003eManual heater-cycle override\u003c\/li\u003e\n\u003cli\u003eOptional RCU-4 remote\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eGF Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI GF Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGF Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting control with GFEP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGFEP\u003c\/th\u003e\n\u003ctd\u003e30 mA, self-testing, manual reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor inputs\u003c\/th\u003e\n\u003ctd\u003e2 (CIT-1, GIT-1, SIT-6E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eUp to 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote\u003c\/th\u003e\n\u003ctd\u003eOptional RCU-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20GF%20Pro%20Snow%2FIce%20Melting%20Control\u0026amp;mpn=GF%20Pro\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765719919,"sku":"ETI-GF-PRO","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-gf-pro.png?v=1793925838"},{"product_id":"eti-snow-switch-pd-pro-snow-ice-melting-control","title":"ETI Snow Switch PD Pro Snow\/Ice Melting Control","description":"\u003cp\u003eThe ETI Snow Switch PD Pro is an automatic snow and ice melting control for roofs, gutters, pavement and loading docks in commercial and residential settings. It takes up to two ETI sensors, typically a CIT-1 aerial sensor paired with a GIT-1 gutter or SIT-6E pavement sensor, and runs heaters only when moisture is detected below 38 °F. An adjustable hold-on timer keeps heaters on for up to 8 hours after snow ends, a Heater Cycle button starts or cancels a cycle manually, and the optional RCU-3 remote adds convenient control.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to two ETI snow\/ice sensors\u003c\/li\u003e\n\u003cli\u003eHeaters run only below 38 °F with moisture present\u003c\/li\u003e\n\u003cli\u003eHold-on up to 8 hours\u003c\/li\u003e\n\u003cli\u003eManual heater-cycle button\u003c\/li\u003e\n\u003cli\u003eOptional RCU-3 remote\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003ePD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI PD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor inputs\u003c\/th\u003e\n\u003ctd\u003e2 (CIT-1, GIT-1, SIT-6E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eUp to 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote\u003c\/th\u003e\n\u003ctd\u003eOptional RCU-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20PD%20Pro%20Snow%2FIce%20Melting%20Control\u0026amp;mpn=PD%20Pro\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982765785455,"sku":"ETI-PD-PRO","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-pd-pro.png?v=1793925837"},{"product_id":"eti-snow-switch-eur-5a-snow-ice-melting-control","title":"ETI Snow Switch EUR-5A Snow\/Ice Melting Control","description":"\u003cp\u003eThe ETI Snow Switch EUR-5A automatically controls a snow and ice melting system with interfaces for up to six environmental sensors, heater contactors and a building energy-management computer, and it ships with a remote control panel. Any one sensor detecting snow or ice starts heating; when they clear, an adjustable 0-10 hour hold-on finishes melting and drying. An included high-temperature limit sensor saves energy by shutting heaters off when natural melting will do, and protects MI and constant-wattage cable from overheating.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to six ETI sensors (CIT-1, GIT-1, SIT-6E)\u003c\/li\u003e\n\u003cli\u003eRemote control panel included\u003c\/li\u003e\n\u003cli\u003eAdjustable 0-10 hour hold-on\u003c\/li\u003e\n\u003cli\u003eHigh-temperature limit sensor included\u003c\/li\u003e\n\u003cli\u003eBuilding energy-management computer interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eEUR-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI EUR-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEUR-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSnow\/ice melting control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor inputs\u003c\/th\u003e\n\u003ctd\u003eUp to 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003e0-10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eRemote control panel, high-temperature limit sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eHeater contactors, EMC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20EUR-5A%20Snow%2FIce%20Melting%20Control\u0026amp;mpn=EUR-5A\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766113135,"sku":"ETI-EUR-5A","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-eur-5a.png?v=1793925838"},{"product_id":"eti-snow-switch-lcd-8-aerial-snow-melting-controller","title":"ETI Snow Switch LCD-8 Aerial Snow Melting Controller","description":"\u003cp\u003eThe ETI Snow Switch LCD-8 is a self-contained aerial snow sensor and controller that makes automatic snow melting practical even on small systems, switching heater loads up to 16 A resistive directly. Heaters run only below a configurable set point (38 °F default) when snow is present, with an adjustable hold-on (3 hours default); both are set, and heaters cycled, with a magnetic reed switch so the enclosure never needs opening. It runs from 100-240 VAC or 24 VAC, operates from -40 to 140 °F, and its Sno-Test self-test confirms operation at power-up.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSelf-contained sensor and controller\u003c\/li\u003e\n\u003cli\u003eSwitches heaters up to 16 A resistive \/ 3 A inductive\u003c\/li\u003e\n\u003cli\u003eConfigurable set point and hold-on\u003c\/li\u003e\n\u003cli\u003eMagnetic reed switch for setup and manual cycling\u003c\/li\u003e\n\u003cli\u003e100-240 VAC or 24 VAC versions\u003c\/li\u003e\n\u003cli\u003eSno-Test power-up self-test\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eLCD-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI LCD-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eLCD-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAerial snow sensor and controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater load\u003c\/th\u003e\n\u003ctd\u003e16 A resistive, 3 A inductive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet point\u003c\/th\u003e\n\u003ctd\u003eConfigurable, 38 °F default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHold-on\u003c\/th\u003e\n\u003ctd\u003eConfigurable, 3 hours default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100-240 VAC or 24 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temp\u003c\/th\u003e\n\u003ctd\u003e-40 to 140 °F (-40 to 60 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20LCD-8%20Aerial%20Snow%20Melting%20Controller\u0026amp;mpn=LCD-8\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766145903,"sku":"ETI-LCD-8","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-lcd-8.png?v=1793925837"},{"product_id":"eti-snow-owl-aerial-snow-sensor","title":"ETI Snow Owl Aerial Snow Sensor","description":"\u003cp\u003eThe ETI Snow Owl is a slim, low-voltage aerial snow sensor that works with a controller or contactor so heated snow and ice melting systems run only when snow or ice is actually present, and only long enough to melt and dry. It mounts on 3\/4 in PVC conduit on a mast or roof up to 2,000 ft from the control panel, uses simple three-wire connections, runs a power-on self-test, and is made from UV-tolerant, corrosion-resistant materials. It also suits building automation systems.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-voltage aerial snow sensor\u003c\/li\u003e\n\u003cli\u003eUp to 2,000 ft from the control panel\u003c\/li\u003e\n\u003cli\u003eMounts on 3\/4 in PVC conduit\u003c\/li\u003e\n\u003cli\u003eThree-wire connection\u003c\/li\u003e\n\u003cli\u003ePower-on self-test\u003c\/li\u003e\n\u003cli\u003eUV-tolerant, corrosion-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSnow Owl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI Snow Owl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSnow Owl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAerial snow\/ice sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e3\/4 in PVC conduit, mast or roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDistance to panel\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 ft (609.6 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003e3 wires: 2 power, 1 signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Owl%20Aerial%20Snow%20Sensor\u0026amp;mpn=Snow%20Owl\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766178671,"sku":"ETI-SNOW-OWL","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-snow-owl.jpg?v=1793925837"},{"product_id":"eti-snow-switch-hsc-24-24-v-pavement-snow-ice-sensor","title":"ETI Snow Switch HSC-24 24 V Pavement Snow\/Ice Sensor","description":"\u003cp\u003eThe ETI Snow Switch HSC-24 is a self-contained, 24 V pavement-mounted snow and ice sensor that signals for melting when moisture is present at pavement temperatures below 38 °F. Its independent relay-contact output works with most electric and hydronic heater controls without a separate control panel, it runs on an NEC Class 2 circuit for safe use in wet locations, and built-in self-tests make operation quick to verify.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSelf-contained, no control panel needed\u003c\/li\u003e\n\u003cli\u003e24 V operation; NEC Class 2 circuit\u003c\/li\u003e\n\u003cli\u003eRelay output for electric and hydronic systems\u003c\/li\u003e\n\u003cli\u003eSenses moisture below 38 °F at the pavement\u003c\/li\u003e\n\u003cli\u003eBuilt-in self-test\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eHSC-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI HSC-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHSC-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePavement-mounted snow\/ice sensor with relay output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e24 V, NEC Class 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrigger\u003c\/th\u003e\n\u003ctd\u003eMoisture at pavement temperature below 38 °F (3.3 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003eIndependent relay contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20HSC-24%2024%20V%20Pavement%20Snow%2FIce%20Sensor\u0026amp;mpn=HSC-24\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766211439,"sku":"ETI-HSC-24","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-hsc-24.jpg?v=1793925837"},{"product_id":"eti-snow-switch-sit-6e-pavement-snow-ice-sensor","title":"ETI Snow Switch SIT-6E Pavement Snow\/Ice Sensor","description":"\u003cp\u003eThe ETI Snow Switch SIT-6E is a pavement-mounted snow and ice sensor for ETI APS, Pro Series and EUR control panels that signals for melting when moisture in any form is present at pavement temperatures below 38 °F, so heaters run only when needed. It sits level with the surrounding surface in a separate adjustable housing (ETI part 23832), and pairing it with a CIT-1 aerial sensor lets the system start as soon as precipitation falls.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSenses snow, sleet, ice or water below 38 °F\u003c\/li\u003e\n\u003cli\u003eWorks with APS, Pro Series and EUR controls\u003c\/li\u003e\n\u003cli\u003eRugged pavement-flush mounting\u003c\/li\u003e\n\u003cli\u003eLow-voltage operation\u003c\/li\u003e\n\u003cli\u003ePairs with CIT-1 aerial sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSIT-6E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI SIT-6E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSIT-6E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePavement-mounted snow\/ice sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrigger\u003c\/th\u003e\n\u003ctd\u003eMoisture at pavement temperature below 38 °F (3.3 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eETI APS, Pro Series, EUR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003ePavement sensor housing, ETI part 23832 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20SIT-6E%20Pavement%20Snow%2FIce%20Sensor\u0026amp;mpn=SIT-6E\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766276975,"sku":"ETI-SIT-6E","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-sit-6e.jpg?v=1793925837"},{"product_id":"eti-snow-switch-git-1-gutter-ice-sensor","title":"ETI Snow Switch GIT-1 Gutter Ice Sensor","description":"\u003cp\u003eThe ETI Snow Switch GIT-1 mounts in gutters and downspouts and, with an APS-3C or APS-4C panel, runs de-icing heaters only when moisture is present below 38 °F, sensing actual conditions where ice forms. Its microcontroller keeps the moisture sensor free of ice bridging and avoids heater ice tunneling, and low-voltage wiring lets it sit up to 2,000 ft from the control panel.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSenses moisture and temperature in the gutter\u003c\/li\u003e\n\u003cli\u003ePrevents ice bridging and tunneling\u003c\/li\u003e\n\u003cli\u003eWorks with APS-3C and APS-4C\u003c\/li\u003e\n\u003cli\u003eUp to 2,000 ft from the panel\u003c\/li\u003e\n\u003cli\u003eRugged housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eGIT-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eETI GIT-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGIT-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eGutter and downspout ice sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrigger\u003c\/th\u003e\n\u003ctd\u003eMoisture below 38 °F (3.3 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eETI APS-3C, APS-4C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDistance to panel\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 ft (609.6 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow do ETI Snow Switch controls work with antenna de-icing?\u003c\/h4\u003e\u003cp\u003eETI sensors detect snow or ice and the Snow Switch control turns the antenna or site heaters on only while needed, then holds them on long enough to melt and dry, cutting energy use compared with manual or thermostat-only control. Digisat can pair the right controller and sensors with your antenna de-icing heaters.\u003c\/p\u003e\u003ch4\u003eDoes Digisat supply ETI dehydrators and Snow Switch controls?\u003c\/h4\u003e\u003cp\u003eYes. Digisat supplies ETI NetCom waveguide dehydrators, manifolds and Snow Switch de-icing controls and sensors with quote-based pricing, and our engineers can size and install them with your antennas and RF chain.\u003c\/p\u003e\u003ch3\u003eNeed it installed, aligned or supported?\u003c\/h3\u003e\u003cp\u003eDigisat engineers install, commission and maintain satellite ground systems for government agencies, teleports and broadcasters worldwide. \u003ca href=\"\/pages\/request-a-quote?service=1\u0026amp;product=ETI%20Snow%20Switch%20GIT-1%20Gutter%20Ice%20Sensor\u0026amp;mpn=GIT-1\"\u003eRequest installation or engineering support\u003c\/a\u003e.\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default Title","offer_id":67982766309743,"sku":"ETI-GIT-1","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/0528\/1135\/files\/eti-git-1.png?v=1793925837"}],"url":"https:\/\/digisat.org\/collections\/eti.oembed","provider":"Digisat International","version":"1.0","type":"link"}